Legendary Wheel Co. HB45 Alloy Wheel Mustang 65-73 17"X8" Charcoal/Machined

This HB45 Alloy wheel complements the vintage body style of your 1965-1973 Mustang. It brings together the best of the past and present in one design. The lightweight cast aluminum and charcoal finish offer protection and unbeatable visual appeal. This wheel is built to fit most 5-lug Mustangs with the original 5" x 4.5" bolt pattern and 4.75" of backspacing. It will also clear most aftermarket brake kits. You can purchase this wheel individually, as a square set of 4, or as a staggered set of 4.

Wheel Information:
- Size: 17” x 8”
- Lugs: 5 x 4.5”
- Finish: Charcoal with Machined Lip
- Backspacing: 4.75”
- Weight: 20 lbs.
- Offset: 1mm
- Center Cap: Included
- Available Individually, as a Set of 4, or as a Staggered Set of 4

Vehicle Fitment:
- 1965-1973 Mustangs

*Lug nuts for installation (P/N WHLLN31) are sold separately.
*The square set of wheels comes with four (4) 17"x8" wheels. 
*The staggered set of wheels comes with 17”x7” front wheels and 17"x8" rear wheels.
*Legendary Wheel Co. “L” logo Center caps are included with the Legendary Wheel Co. wheels. Spinner style center caps (LWCSAS) are sold separately. Lug nuts are not included, CJ Pony Parts carries the correct lug nuts for installation of Legendary Wheel Co. wheels.

Additional Notes:
- This 17”x8" wheel is intended for rear fitment only in 1965-1968 Mustangs, as wider wheels can rub on the front wheel opening when turning. The square set of 17"x8" wheels are recommended for 1969-1973 Mustangs only.
- These wheels require the use of extended thread lug nuts WHLLN118 or extended wheel studs.

Tech Tip: Even though these wheels are intended to fit the rear of most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.75” backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.