Classic Performance Products Street-Trac Traction Bars Pair For Stock Height Leaf Springs Mustang 1965-1973

When cornering or tackling on-road obstacles, your 1965-1973 Mustang needs all the help it can get! If your Mustang features stock height leaf springs on its stock rear end, then upgrade its suspension today with this Pair of Classic Performance Products Street-Trac Traction Bars (6473TB) from CJ Pony Parts!

Features and Benefits:
- For Stock Rear End Applications with stock height leaf springs
- D-spec Bushings
- Offers Additional Ground Clearance
- Reduces Stress on the Leaf Springs

This Pair of Street-Trac Traction Bars (6473TB) made by Classic Performance Products are constructed from 1” 0.156-wall 4130 with 3/16” laser-cut bent-steel mounts. They also have self-lubricating plastic D-type bushings and 3/4" rod ends. If your Mustang maintains a forward-slanted approach angle, then CPP has just what you need! The front mount has additional ground clearance in this case, so if your Mustang does makes contact with an on-road obstacle, the angle approach will act as a skid plate and the car will lift itself over the obstacle.

These traction bars (6473TB) will help to decrease stress on the top of the leaf spring because the portion of the linkage that contacts the spring is a wider flat surface. CPP relocates the pivot positions to improve weight transfer while reducing the spring load. Keep in mind that this pair of traction bars are intended for use on Mustangs with stock rear end applications with stock height leaf springs.

Please Note: CPP traction bars fit only vehicles with 3" axle tubes.

Vehicle Fitment:
- 1965-1973 Mustang