Dome Lamp Dimmer Module Deluxe Mustang 1965-1973
CJ's Part Number:
DDLD
Highlights
- Dome Light Dimmer Module
- 7-1/2 Amp Resettable Fuse
- Simple 3 Wire Installation
- 24" Long 18 Gauge Wires
$84.99
Deluxe Dome Lamp Dimmer Module for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
Soften and modernize the interior lighting in your classic Mustang with this Deluxe Dome Lamp Dimmer Module. Stepping up from the standard module to the deluxe module provides your vehicle with a theater lighting effect which means the dome light gradually turns on and fades off.The dimmer module is compatible with LED and incandescent bulbs up to four amps.
Kit Includes:
- Controller unit
- Four T-taps
- Two zip ties
- One small crimp ring
- Four male 1/4" connectors
Technical Specifications:
- 2" x 1-1/2" x 1" plastic enclosure with mounting tabs
- Internal 7-1/2 amp resettable fuse
- Delay period approximately 30 seconds when power switched off
- Fade function fully compatible with LED dome lights (Uses PWM to dim the lights)
- Fully potted
- 24" long, 18 gauge wires
- Microprocessor controlled
- Simple three-wire installation
- Made in the USA
Although still rather simple, the deluxe dome lamp dimmer module adds a few more connections to the installation process. Three wire taps are used on the existing wires going to the dome light and door switch. An optional connection made between two of these wires (as outlined in the installation instructions) gives the module full control of the dome light. Another wire needs switched 12V power and a fifth wire is attached to a ground. The deluxe module gets the most out of your dome light with perfect delays and theater lighting.
Kit Includes:
- Controller unit
- Four T-taps
- Two zip ties
- One small crimp ring
- Four male 1/4" connectors
Technical Specifications:
- 2" x 1-1/2" x 1" plastic enclosure with mounting tabs
- Internal 7-1/2 amp resettable fuse
- Delay period approximately 30 seconds when power switched off
- Fade function fully compatible with LED dome lights (Uses PWM to dim the lights)
- Fully potted
- 24" long, 18 gauge wires
- Microprocessor controlled
- Simple three-wire installation
- Made in the USA
Although still rather simple, the deluxe dome lamp dimmer module adds a few more connections to the installation process. Three wire taps are used on the existing wires going to the dome light and door switch. An optional connection made between two of these wires (as outlined in the installation instructions) gives the module full control of the dome light. Another wire needs switched 12V power and a fifth wire is attached to a ground. The deluxe module gets the most out of your dome light with perfect delays and theater lighting.
California Residents: Proposition 65 Warning
Installation Difficulty
Moderate
Intermediate skill is required for this installation.
Installation Videos
Video Transcript
We're here with dome lamp dimmer modules, fitting all 1964 through 1973 Mustangs. We have here the standard and the deluxe version of our dome light dimmer switch module. The standard version is going to tie in to your door pin switches. When you close the doors, instead of the light going out instantly, it will slowly dim down just like a modern car would. The deluxe version does the same thing, but actually there's a few more feature and has little more wiring involved with it. This will work off of switch power as well, when the switch power is off, the dome light will stay on for 10 seconds, then it will fade off. If the switch power on because the car is running, the light will actually fade off as soon as you close the door. When the switch power shuts off completely, the dome light will automatically come on. If the door is left open for more than 10 minutes, it will shut itself off. Our dome light modules are another great way to add a modern amenity to add to your classic Mustang.
Installation Instructions
Write Your Own Review
Might Also Like
CJ's Picks