Ford Performance Air Cleaner 13" Round Black With Raised Ford Racing Logo And Slant Edge

Ford Performance:
100% of 100


  • Round 13" Air Cleaner
  • Matte Black Finish
  • Silver Ford Racing Logo
  • Minimum Of 3-3/4" Clearance
MSRP $215.00
You save $10.01

Ford Performance Black 13" Round Air Cleaner with Raised Ford Racing Logo and Slant Edge.

This Slant Edge 13" Black Air Cleaner with a Raised Ford Racing Logo is made specifically for two and four-barrel carbureted engines. It has an eye-catching raised Ford Racing logo on its top.

Features and Benefits:
- For 2-Barrel and 4-Barrel Carbureted Engines
- Has a Raised Ford Racing Logo on Top
- Includes a Motorcraft Air Filter Element and Necessary Mounting Hardware
- Easy to Install
- Recessed Base For More Hood Clearance

You'll get a Motorcraft air filter element and all of the necessary mounting hardware when you order this air cleaner. This air cleaner lid installs on a short stud that's screwed into the center of your carburetor. The lid has a threaded boss on its underside and is spun into place to finish the installation job.

Tech Tip: After installing a new air cleaner, you should always lower the hood slowly to confirm that there is sufficient clearance visually. A minimum clearance of 3-3/4" is required from the top of the carburetor gasket area to the underside of the hood.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

We’re here with a matte black Ford racing air cleaner assembly, fitting your 2 or 4 barrel carburetor from Ford Performance. This Ford Performance air cleaner features a 13 inch diameter, has a heavy duty top plate with a raised Ford Racing logo on the top, includes a brand new motorcraft element and will work with a 2 or 4 barrel carburetor. Comes with all necessary hardware included for installation. This Ford Racing air cleaner assembly will work with most stock or aftermarket carburetors, is a great way to dress up your Ford Performance Engine.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.