Holley HydraMat 2-1/2” X 8” Rectangle

Whether it’s hard cornering and acceleration or stopping, this 2-1/2” X 8” Rectangle HydraMat by Holley makes fuel starvation a distant memory (16-116)! This HydraMat acts as a wall between your fuel system and air for peak performance. Surface tension and fluid wicking let it draw fuel from any area it’s in contact with. Afterwards, the fuel is stored in the unique internal reservoir, keeping it accessible at the pick-up even when it’s turbulently sloshing. Plus, any time it’s uncovered, tiny pores on the media seal off so it can draw fuel from the available areas!

Features and Benefits:
- Perfect for countering fuel starvation
- Prevents air from entering fuel system
- Surface tension & fluid wicking help draw fuel from tank/cell
- When uncovered, media’s tiny pores draw fuel where available
- Internal reservoir keeps fuel available at pick-up under sloshing
- Eliminates need for specialty reservoirs, sumps, & pick up pumps
- Fuel compatibility: alcohol, ethanol, methanol, & E85
- Works w/ 2-cycle oil blends as high as 20:1
- Can be compressed for installation thru fuel cell openings
- Can serve as 15-micron pre-filter

With the HydraMat, you won’t have to worry about getting any specialty reservoirs, sumps, or pick-up pumps. It can even serve as a 15-micron pre-filter, so you’re spared the hassle of getting a separate filter before the fuel pump. Alcohol, ethanol, methanol, and E85 fuel types alike work with the HydraMat provided that you’re using a two-cycle oil blend under 20:1. With the bonus of a design that can be folded and compressed, you’ll be able to place it through almost any fuel cell opening.

Vehicle Fitment:
- 1965-1985 Ford Mustang
- 1966-1977 Ford Bronco
- 1948-1979 Ford F-100
- 1960-1987 Chevrolet C10

Additional Notes:
- Not for use with most oils; please use only with the oils listed above.
- Not for use with diesel fuels.