Maximum Motorsports K-Member With 2-Point Chassis Brace 4.6L/ Coyote/ LS Mustang 1996-2004

Maximum Motorsports:
MMKM-2

Highlights

  • Tubular Steel Construction
  • Significant Weight Reduction
  • Added Strength
  • Engine Swap Capable
$699.97

Purchase this Maximum Motorsports K-Member With 2-Point Chassis Brace for 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with 4.6L, Coyote, or LS engines.

When it comes to handling, the only thing that ought to flex on your SN95 is the suspension! The Maximum Motorsports K-Member (MMKM-2) offers significant reinforcement over your stock version. This K-member is also 26% lighter than your factory K-Member, adding both strength and lightness for your 1996-2004 Mustang. 

Features and Benefits:
- Fits 1996-2004 Mustangs with a 4.6L, 5.0L Coyote or LS Engine Swap
- Constructed from High Quality Tubular Steel
- Black Powder Coated Finish
- Improves Suspension Geometry
- 26% Lighter than Stock K-Member
- Proudly Manufactured in the USA! (San Luis Obispo, California)
- Includes 2-Point Chassis Brace
- Raised Front Control Arm Pivot Points (Street and Race)
- Control Arm Pivot Points Move Straight Forward 0.75”
- Maintains Stock Engine Mount Height
- 2-Sets of Engine Mount Holes to Choose from Moves Engine (Stock or 1” Rearward)
- Includes Detailed Installation Instructions
- Track Tested K-Member

The Maximum Motorsports K-member is constructed from high-quality tubular steel. The motor mounts on the K-member are in the factory location but also include additional locations so you can move the engine rearward by 1”. The Front Lower Control Arm Mounts are shifted 0.75” straight forward, this will increase positive caster and moves the center of gravity slightly rearward for improved weight distribution. The stiff K-Member design will prevent flexing, which will improve steering response and handling. The Maximum Motorsports K-Member is proudly manufactured in the USA!

This Kit Includes:
- Maximum Motorsport K-Member (4.6L, 5.0L Coyote and LS Engines)
- K-Member Brace
- Pair of Flat Washers (5/8”)
- Pair of Flat Washers (M12 x 24mm OD)
- Set of Six Flat Washers (1/2”)
- Pair of Grade 8 ½” – 20 x 1-1/4” Hex Bolts
- Pair of Grade 8 ½” – 20 x 2” Hex Bolts
- Pair of Low Profile Front Control Arm Bolts (for improved clearance between the rubber steering rack boot and the heads of the two forward pivot boots)
- Pair of Angle Iron Guides
- Set of Four K-Member Brace Spacers

Vehicle Fitment:
- 1996-2004 Mustang

ATTENTION: Due to increased demand for this hand built product, this part may take up to eight weeks for shipment.

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.