Maximum Motorsports Roll Bar Sport 4-Point Without Door Bars With Removable Harness Mount Mustang Coupe/ Hatchback 1979-1993

Maximum Motorsports:
MMRB-1.3

Highlights

  • Steel Construction
  • Bolt On Installation
  • Fits Stock Interior
  • Made in the USA
$887.00
Earn
points.
Product Description

Maximum Motorsports 4-Point Sport Roll Bar without Door Bars and with a Removable Harness Mount for 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 and 1993 Coupe and Hatchback Mustangs.

This 4-Point Sport Roll Bar (MMRB-1.3) without Door Bars will increase the rigidity of the chassis on your 1979-1993 Coupe or Hatchback Mustang while providing increased safety. Maximum Motorsports provides a removable harness mount tube for safe attachment of a 5-point harness' shoulder belts.

Maximum Motorsports manufactures all their Roll Bars from the highest quality materials and hardware. Made of 1-3/4" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing). Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting. All hardware is Grade 5 or higher. Maximum Motorsports roll bars are designed to fit with your stock Mustang interior.

Features and Benefits:
- Removable Harness Mount Tube
- Stiffens Chassis
- Grade 5 or Higher Hardware
- 1-3/4" Diameter by 0.134" Wall DOM Tube

The Maximum Motorsports Roll Bars are designed to bolt to the chassis, without welding. The floor pan is sandwiched between the roll bar mounting pads and the back-up plates underneath the floor pan. There is a significant clamping force between the two pads, providing a very secure method of attachment. Although the roll bar does not weld to the chassis you will need to weld the rear supports to the main hoop.

All of Maximum Motorsports roll bars are uncoated, bare steel. For a high-quality finish, the installer should paint or powder coat the roll bar as part of the installation. Roll bars should have padding wherever any part of an occupant's body may come into contact with the steel tubing. This includes hands, feet, arms, and legs, not just the occupants' heads.

Please Note: This roll bar does NOT conform to NHRA and NMRA rules.

ATTENTION: Due to increased demand for this hand-built product, this part may take up to eight weeks for shipment.

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Interior, Mustang Roll Bars

Installation & Fitment

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account