Power Grip Hose Clamp 5/8"
Single 5/8" Power Grip Hose Clamp.
Tired of clamps that can be a pain to install in tight areas on your classic Ford and always end up needing to be retightened? Then take a look at this Single 5/8" Power Grip Hose Clamp from CJ Pony Parts! The heat sensitive thermoplastic design of the clamp retightens itself under normal engine temperatures and can be easily installed with just a heat gun.
Power Grip Hose Clamp Features and Benefits:
- Manufactured from Heat-Sensitive Thermoplastic
- Conforms to Hose or Housing Shape
- Wider Sealing Area Covers Connector Bead
- Retains Dynamic Tension So There is Never a Need to Retighten
- Material Memory Prevents Over or Under- Tightening
- Temperature Rating of -40 Degrees Fahrenheit to +302 Degrees Fahrenheit (-40 Celsius to +150 Celsius)
- Easy Installation with Heat Gun
The Power Grip Hose Clamp has been manufactured from heat-sensitive thermoplastics. This allows the clamp to conform to any hose or fitting no matter what shape it is. It can even fit over fittings with a raised bead because of the wider sealing area. With the ability to retain its dynamic tension, you will never have to retighten this clamp! This is because when your engine reaches normal operating temperatures the clamp shrinks and readjusts to fit snuggly to the hose, always applying consistent pressure. Even on cold winter days, the clamp constricts so that you will no longer have to worry about cold leaks.
Resistant to all automotive fluids such as oil, antifreeze, and brake fluid, you will never have to worry about the clamp corroding. Environmentally conscious? Well, this clamp eliminates antifreeze leaks which also eliminates ground water contamination! Installation of the power grip hose clamp is also super easy, even in those hard to reach places. No tools are required, just using an ordinary heat gun will have the hose clamp fastened in no time at all.
Power Grip Clamp Specifics:
- Fits Hose (O.D.) – 5/16” to 1-1/16”
- Nominal Hose I.D. – .625”
- Hose O.D. Min – .9375”
- Hose O.D. Max – 1.0625”
- For Heater and Bypass Hoses
Order this Single 5/8" Power Grip Hose Clamp from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This Power Grip 5/8th Hose Clamp will fit a 15/16 to 1/16th hose, and is a unique way to install the hose on your vehicle. The clamp will slide over the hose itself, then use a heat gun to heat the clamp up, then it'll shrink to fit making a much tighter, more sealed fit than a standard hose clamp.
These Power Grip Hose Clamps are available in several different sizes at CJPonyParts.com.