If it’s finally time to get a brand new clutch kit for your 1996-2004 GT Mustang with a Manual Transmission, then you’ve come to the right place. This RAM Clutches (88951HDT) HDX 1-1/8 x 26 Spline 11” Clutch Kit is for applications up to 450 horsepower and has organic clutch disc material. This clutch kit has an 11” diaphragm pressure plate and a five spring helix hub. Included with the RAM Clutches (88951HDT) HDX 1-1/8 x 26 Spline 11” Clutch Kit is a pressure plate, a clutch disc, a release bearing, and an alignment tool.
Features & Benefits:
- Single Disc
- 11” Diaphragm Pressure Plate
- Organic Clutch Disc Material
- 5 Spring Helix Hub
- Rated to 450 Horsepower
- Designed for 26 Spline equipped Transmissions
- 30 Percent More Clamp Pressure Than Stock
*Does not include installation hardware.
Please Note: A flywheel is NOT included with this clutch kit. You can reuse your existing flywheel, but we strongly recommend to have the flywheel resurfaced if needed.
- Pressure Plate
- Clutch Disc
- Release Bearing
- Alignment Tool
Tech Tip: This Clutch Kit is designed for use with 26 spline aftermarket transmissions such as the Tremec TKO and T56 or factory T5, T45 and TR3650 transmissions equipped with a 26 spline conversion
Tech Tip 2: Some Mustangs from 1999-2001 will either have a 6 or an 8-bolt crankshaft depending on which manufacturing plant they came from. You can easily tell which facility may have assembled your engine by looking at the 8th digit found in your Vehicle Identification Number (VIN). A "X" is for Windsor which would have an 8-bolt crankshaft while a "W" is for Romeo and would have a 6-bolt crankshaft. Be sure to check your VIN or the old flywheel before ordering this product.
- 1996-2004 Mustang GT