RAM Clutches Clutch Kit Force 9-1/2" 1-1/8 X 26 Spline With 6-Bolt Aluminum Flywheel Mustang GT 1996-2010

For a high-performance dual clutch setup that can hold up to 650HP with great street performance, the  RAM Clutches 1-1/8 x 26 Spline 9-1/2" Force Clutch Kit also includes an Aluminum Flywheel for your 1996-2010 Mustang. This clutch works great for street grip and the dual clutch setup improves durability and provides smooth pedal engagement.

Features and Benefits:
- 1-1/8 x 26 spline
- 9.5” Diaphragm Pressure Plate
- 6 Spring Helix Hub
- Designed for Street to Strip Applications
- Dual Disc Clutch
- Rated to 650 Horse Power
- Fits 164 Tooth Flywheel
- Billet Aluminum Flywheel
- Made in the USA

Included:
- 26 Spline
- 9.5" Diameter Disc
- 9.5" Diameter Clutch Plate
- 6-bolt Aluminum Flywheel

Additional Notes:
- Does not come with hardware for installation.
- Installation requires M6379B & HW1969 hardware.
- Will not fit V6 Mustangs.

Vehicle Fitment:
- 1996-2004 Mustang GTs
- 2005-2010 Mustang GTs

Tech Tips:
- Some GT Mustangs from 1999-2001 will either have a 6 or an 8-bolt crankshaft depending on which manufacturing plant they came from. You can easily tell which facility may have assembled your engine by looking at the 8th digit found in your Vehicle Identification Number (VIN). An "X" is for Windsor which would have an 8-bolt crankshaft while a "W" is for Romeo and would have a 6-bolt crankshaft. Be sure to check your VIN or the old flywheel before ordering this product.
- This clutch will fit T45 and TR3650 transmissions as long as you match it with the appropriate size flywheel. The T45 originally came with a 10.5” clutch and flywheel combination whereas the TR3650 came with an 11” clutch and flywheel combination. These combinations are interchangeable as long as the factory 10 spline shaft is still installed.