RAM Clutches Clutch Kit Force 9-1/2" 1-1/16 X 10 Spline With Aluminum Flywheel Mustang GT 1996-2010

RAM Clutches:
75-2260

Highlights

  • Made in the USA
  • Billet Aluminum Flywheel
  • Dual Disc Clutch
  • Rated up to 650 Horsepower
$984.99

RAM Clutches 9-1/2" 1-1/16 X 10 Spline Force Clutch Kit with Aluminum Flywheel for 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 and 2010 GT Mustangs with a Manual Transmission.

The dual disc RAM Clutches 9-1/2" 1-1/16 X 10 Spline Force Clutch Kit 75-2260 is an improvement from heavy steel clutch components. Great for street-to-strip 1996-2010 GT Mustangs, this 6 spring helix hub kit is rated up to 650 horsepower with an American-made dependency that will keep your manual transmission operating at its peak. The 9-1/2" pressure plate is complemented by a 9-1/2" disc that works in tandem with a 1-1/16" x 10 spline. Pick up the necessary hardware for a weekend installation that will have you back on the road in no time!

Features:
- 1-1/16 x 10 spline
- 9-1/2” Diaphragm Pressure Plate
- 6 Spring Helix Hub
- Designed for Street-to-Strip Applications
- Rated to 650 Horse Power
- Dual Disc Clutch
- Billet Aluminum 6-Bolt Flywheel
- Made in the USA

*Does not come with hardware for installation.
*Will NOT fit V6 Mustangs.

Included:
- 26-Spline
- 9-1/2" Diameter Disc
- 9-1/2" Diameter Clutch Plate
- 6-Bolt Aluminum Flywheel

Vehicle Fitment:
- 1996-2010 GT Mustang

Please Note: Installation hardware M6379B and HW196 is required.

Tech Tips:
- Some GT Mustangs from 1999-2001 will either have a 6 or an 8-bolt crankshaft depending on which manufacturing plant they came from. You can easily tell which facility may have assembled your engine by looking at the 8th digit found in your Vehicle Identification Number (VIN). The 8-bolt crankshaft is identifiable by "X" for Windsor and 6-bolt crankshaft is identifiable by "W" for Romeo. Please verify your VIN or the old flywheel before ordering this product.
- This clutch will fit T45 and TR3650 transmissions if matched with the appropriate size flywheel. The T45 originally came with a 10.5” clutch and flywheel combination where as the TR3650 came with a 11” clutch and flywheel combination. These combinations are interchangeable as long as the factory 10 spline shaft is installed.

California Residents: Proposition 65 Warning

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart