Scott Drake Spark Plug Wire 8mm Blue Set 260/289/302

Scott Drake:

C5OZ-12259-BL8

Scott Drake Spark Plug Wire 8mm Blue Set 260/289/302 is rated 3.6 out of 5 by 9.

Highlights

Direct-Fit Replacement Set
Ni-Cr Spiral Wound Inner Core
8mm Plug Wire Diameter
Blue With Repeating Ford Logo

MSRP $53.95

$48.56

You save 10%

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

Set of Scott Drake Blue 8mm Spark Plug Wires for 260, 289 and 302 Engines.

Is it time to restore your classic Ford? Make sure you only get the best quality products for your small block engine. CJ Pony Parts carries a wide array of direct-fit replacement parts for your 260, 289 or 302 engine, including this Set of Blue 8mm Spark Plug Wires from Scott Drake. Made with high-quality materials and designed to directly replace your originals, these wires will have your Ford running like new in no time.

Scott Drake Spark Plug Wire (C5OZ-12259-BL8) Features:
- Ni-Cr (Nickle-Chromium) Spiral Wound Inner Core
- High-Temp Silicone Boot and Outer Jacket
- Numerical Cylinder Marking Tabs On Each Plug Wire
- Blue with Repeating Ford Logo
- 8mm Plug Wire Diameter
- Direct Fit Replacements
- Length-Matched for 260/289/302 Engines

Scott Drake's high-performance spark plug wires are made with a nickel-chromium (Ni-Cr) spiral wound inner core. The boots and outer jacket are both manufactured using silicone, while the distributor terminals are brass and the spark plug terminals are stainless steel. The outside of these wires are blue and printed with a repeating Ford logo for added style under your hood. These wires will directly replace your factory originals without any other parts or modifications. The plug wire diameter is 8 mm and there are numerical cylinder marking tabs on each wire, ensuring a clean, professional-looking engine compartment.

Applications:
- 1965-1973 Mustang
- 1966-1977 Bronco
- 1948-1979 F-100

Order this Set of Scott Drake Blue 8mm Spark Plug Wires (C5OZ-12259-BL8) for your 260, 289 or 302 Engine from CJ Pony Parts today!

Installation & Fitment

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

1948,
1949,
1950,
1951,
1952,
1953,
1954,
1955,
1956,
1957,
1958,
1959,
1960,
1961,
1962,
1963,
1964,
1965,
1966,
1967,
1968,
1969,
1970,
1971,
1972,
1973,
1974,
1975,
1976,
1977,
1978,
1979,

This product will fit the following Mustang years:

Reviews

Rated 2 out of 5 by Dsc113 from Does the job but could be much better The rubber boots on the wires are very thin. They almost feel like a plyable plastic then rubber. The wires could stand to be a few inches longer to allow for a more custom routing. Theses are for distributors with the old style points system and female distributor caps. You would be better off to purchase a set of wires that you build yourself.

Date published: 2019-03-31

Rated 5 out of 5 by NeilG from Looks Great I purchased these spark plug wires for my '68 Mustang 289. Overall, I'm very pleased with the look. Some of the wires were a little too short which didn't allow me to install my wire loom symmetrically on the valve-covers the way I originally intended. In spite of this, I think the blue wires look amazing.

Date published: 2019-07-25

Rated 1 out of 5 by Merlot from Disapointed Installed on 1964 1/2 Mustang 260 engine. The wires were numbered very nicely but I will be rearranging wires so they fit. Will have to cut all of the number tags off as they will all be out of place. Also very hard to get onto the plugs. Mat even see if I can return for a refund.

Date published: 2019-03-12

Rated 2 out of 5 by jimisa from Do not fit properly. For a supposedly custom fit these wires are NOT! The nbr 8 wire is too short and some of the others are too long. Do not fit properly. Should have returned them but proberly going to build a set myself. They look great ,to bad they don't fit.

Date published: 2019-09-18

Rated 4 out of 5 by Joe 66 from Wire length The wire for cylinders 1 and 5 are about 3 inches too long. But for the cylinders 5 and 8, the wire is about 3 inches too short. You can mount them, but if they were longer, it would look better and the valve cover would be visible.

Date published: 2018-12-03

Rated 3 out of 5 by tommmy two tone from Looks good Purchased because they were supposed to a "direct fit" replacement, # 1,2,5 and 6 are too long. Other than that they work well. *1967 Mustang coupe, 289 (original engine).

Date published: 2018-04-11

Rated 5 out of 5 by Mr Sonoma from Awesome color Love the color and the fit wires us a little bit big for stock clips but still fits

Date published: 2019-01-20

Rated 5 out of 5 by Mystang Mitch from Perfect fit The fit was excellent. Length perfect and well marked for installation.

Date published: 2018-06-29