Wilwood Master Cylinder Remote Tandem Black With 1-1/8" Bore

If refreshing your classic vehicle’s braking system is a priority in your restoration project, then it’s time to pick up this Wilwood (260-14244-BK) Black Remote Tandem Master Cylinder with a 1-1/8" Bore! The 1-1/8” bore is made mainly for use with power brake applications, from either vacuum assist or hydraulic assist systems.

Features & Benefits:
- High-pressure, die casting aluminum materials
- Black finish
- 1-1/8” bore
- Fluid outlet ports on both sides of bore
- Total piston stroke is set to 1.12”
- Volume ratio of 2:1 between chambers
- Remote reservoirs
- Easy installation
- Includes necessary hardware
- Direct-fit replacement

Please Note: If you are replacing a factory style master cylinder, additional plumbing lines and fittings may be required for correct installation.

*Does not include a push rod, must be purchased separately. P/N: A1726

This Wilwood (260-14244-BK) Black Remote Tandem Master Cylinder with a 1-1/8" Bore is made for mount flanges from 3.22” to 3.4” and provide fluid outlet ports on each side of the bore. The stroke is at 1.12” with the volume ratio of 2:1 between the primary and secondary chambers. The master cylinder weighs just 3 lbs, as it was made from high-pressure die castings.