Pro-5.0 Manual Shifter for 1983-2001 Mustangs with a T-5 or T-45 5-Speed Manual Transmission.The Pro-5.0 manual shifter is considered the original; the measuring stick for all other shifters. The famous "offset-preload" coil springs find third gear for you, basically you can't miss 2nd to 3rd gear! Also, Pro-5.0 features adjustable positive stops to prevent over extending the shift lever, preventing costly transmission damage.
The Pro-5.0 shifter offers up to a 33% shorter throw than the factory unit. It includes a Pro-5.0 shifter handle. Unfortunately this shifter does NOT include a shift knob, however you can reuse your factory shift knob or use any shift knob with the correct 12mm X 1.75 thread pattern.
This will fit all 1983-2000 V8 Mustangs and some 2001 V8 Mustangs*. Also fits 1987-1993 4 Cylinder and 1994-2004 V6 Mustangs with manual transmissions.
*Tech Tip: If you have a 2001 Mustang, you must check your door tag to verify your correct transmission type.
6 = T-45
K = 3650
*This shifter will not work on the Tremec 3650 transmission. You must use MS21 if you have a Tremec 3650.
Similar Mustang PartsMore Mustang Shifters
You Might Also Like
CJ's Low Price:$43.99
CJ's Low Price:$39.99
By Bill Tumas: We're here with a Pro-5.0 Power Tower shifter for your 1983 through 2001 Mustang. Pro-5.0 shifter features a heavy duty billet construction. You can see it's got adjustable stops both front and rear. It's also preloaded for third gear making it very hard to miss. It comes with its own handle, which has a 12 by 1.75 thread pattern that will fit most late model shift knobs. Compared to the stock shifter you can see how much beefier the Pro-5.0 is. It's going to fit any T5 transmission, as well as any T45, as well. Your Pro-5.0 is going to fit all 1983 through 2001 V8 Mustangs. Somewhere in 2001 Ford did change to a 3650, so if that's the transmission you have, Pro-5.0 makes a shifter for you as well.