BMR Front Lower Control Arm With Tall Ball Joints Black Hammertone Pair For Use With Coil Overs 1979-1993

BMR:
AA038H

Highlights

  • Polyurethane Bushings
  • Improve Geometry And Handling
  • Powder Coated Finish
  • Made In The USA
$329.95

Pair of BMR Black Hammertone Front Lower Control Arms with Tall Ball Joints for all 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 and 1993 Mustangs with Coil Overs.

Though the A-arms are one of the more important components of your suspension, they are often overlooked or forgotten. Any deflection to the front suspension could cause a change in your alignment and result in poor performance and driving experience. Make sure your front A-arms are solid and stable by replacing them with this Pair of Black Hammertone Front Lower Control Arms with Tall Ball Joints from BMR. These arms fit all 1979-1993 Mustangs with coil overs.

The Front Lower Control Arms (P/N: AA038H) are constructed from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall steel tubing. These are DOM tubes, meaning they are cold drawn over a mandrel which provides better dimensional tolerances, improved surface finish and the strongest weld strength achievable. DOM tubing is considered high-quality. BMR's tubes are then finished in a durable black hammertown powder coat for added strength and resilience to rust and damage. These front arms come equipped with 95-durometer polyurethane bushings that add a solid, more responsive feel over the stock rubber bushings. The bushings are internally fluted, which allows grease to evenly coat the inner sleeve and makes for a reliably quiet operation over the bushings service life. The flutes also direct grease to the outer edge of the bushing to keep the thrust surface lubricated. The included tall ball joints improve front end geometry for increased handling ability.

Control Arm Features:
- Constructed from DOM Steel Tubing
- Durable Black Hammertone Powder Coat Finish
- Greaseable Polyurethane Bushings
- Eliminates Lower A-arm Deflection
- Tall Ball Joints Improve Geometry and Handling
- Fixture Welded for Precise Fitment
- Improves Steering Feel and Response for Normal and Performance Driving
- Proudly Made in the USA
- Fits all 1979-1993 Mustangs with Front Coilovers

*The Front Lower Control Arms will only work on Mustangs with Coilovers.
*Installation time is 3-4 hours.

Order a Pair of BMR AA038H Black Hammertone Front Lower Control Arms with Tall Ball Joints for your 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 or 1993 Mustang with Coil Overs from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.