BMR Lowering Drag Spring Set GT500 Mustang 2007-2014

The BMR (SP075R) Lowering Springs are designed for 2007-2014 GT500 Mustangs that are setup for Drag Racing. The BMR Lowering Drag Springs are constructed from Chrome Silicon High Tensile Spring Wire, and are cold wound on a CNC coiling machine. Once the Lowering Drag Springs are constructed they are then Powder Coated in a Red Finish. The CNC Coiling Head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This will guarantee that the springs will match on each side. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated.

Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. These BMR (SP075R) Drag Racing Springs will drop your GT500 approximately 1.5 inch and feature a fine-tuned spring rate to give you better launches. The 165 lb/inch front linear rate spring and 160 lb/inch rear dual-rate spring offer plenty of weight transfer for hard launches. The BMR Lowering Drag Springs are proudly designed and manufactured in the USA!

Features & Benefits:
- Fits 2007-2014 GT500 Mustangs
- Lowers GT500 Approximately 1-1/2”
- Designed for Drag Race Applications
- Constructed from Chrome Silicon High Tensile Spring Wire
- Cold Wound on a CNC Coiling Machine
- Stress-Relieved at 750 Degrees
- Shot-Peened Springs
- Proudly Designed and Manufactured in the USA!

Spring Rates:
- Front: 165lb Linear Rate Spring
- Rear: 160lb Dual Rate Spring