Centerforce Clutches DFX Clutch Pressure Plate 26-Spline/ Single Disc Set 10.4” 5.0L Mustang 1979-1993/ GT Mustang 1994-2001/ Cobra Mustang 1993-1998

Bring comfortable drivability and high-performance quality together with this DFX Clutch Set from Centerforce Clutches. With this clutch set, you’ll receive a 10.4” full-face sprung hub clutch disc and pressure plate that are designed to fit 26-spline input shafts, as well as an alignment tool to assist with setup. This clutch setup is engineered for comfortable daily driving by retaining light pedal effort while also providing increased integrity and holding capacity. Centerforce Clutches designed the DFX Clutch Set for stock or lightly modified Mustangs, making a great entry point to modifications and high performance!

Features and Benefits:
- Superior Performance Over Stock
- SFI Spec 1.1 Approved
- 10.4” (264.22mm) Diameter
- Full-Face Single Disc
- 1-1/16” x 26-Spline Input Shaft
- Sprung Hub Disc with Organic Material
- Retains Light Pedal Feel
- Centrifugally Assisted
- Made in the USA

Set Includes:
- Pressure Plate
- Clutch Disc
- Alignment Tool

Vehicle Applications:
- 1979-1993 Ford 5.0 Mustang
- 1994-2001 Ford GT Mustang
- 1993-1998 Ford Cobra Mustang

Tech Tip: For Mustangs equipped with T-45 from Tremec in factory US spec mustangs. In 2001, Ford made the Mustang GT available with two different transmissions. To find out which style transmission you have, check the data sticker located on the driver-side door jamb. A "K" means the car came with a TR3650 and a "6" indicates a T45. This clutch kit works with the T45.

For Mustangs with a 26-spline input shaft. Please see CK480 for 10-spline.

Please Note: Due to the materials used, the DFX Clutch Series is more aggressive with less dampening; this can cause some additional drivetrain noise and/or chatter.