Classic Performance Products Street-Trac Traction Bars Pair Mustang 1965-1973 With 2" Or 3" Lowering Blocks And Reverse Eye Leaf Springs
Highlights
- Proudly Made in the USA!
- Laser-Cut Bent-Steel Mounts
- Self-Lubricating Bushings
- Reduces Stress on Leaf Spring
Pair of Classic Performance Products Street-Trac Traction Bars for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Mustangs with 2" or 3" Lowering Blocks and Reverse Eye Leaf Springs.
Give your 1965-1973 Mustang all the help it can get when cornering or tackling on-road obstacles! If your Mustang features 2” or 3” lowering blocks and reverse eye leaf springs, then upgrade its suspension today with this Pair of Classic Performance Products Street-Trac Traction Bars (6473TB-RL) from CJ Pony Parts!
Features and Benefits:
- For Stock Rear End Applications with 2” or 3” lowering blocks and reverse eye leaf springs
- D-spec Bushings
- Offers Additional Ground Clearance
- Reduces Stress on the Leaf Springs
This Pair of Street-Trac Traction Bars (6473TB-RL) made by Classic Performance Products are built using 1” 0.156-wall 4130 with 3/16” laser-cut bent-steel mounts. They also have self-lubricating plastic D-type bushings and 3/4" rod ends. If your Mustang always has a forward-slanted approach angle, then CPP has the right thing for you! In this case, the front mount has additional ground clearance, so if your Mustang does makes contact with an on-road obstacle, the angle approach will act as a skid plate and the car will be able to lift itself over the obstacle.
These traction bars (6473TB-RL) will help to diminish stress on the top of the leaf spring because the portion of the linkage that contacts the spring is a wider, flatter surface. CPP relocates the pivot positions to optimize weight transfer while slashing the spring load. Keep in mind that this pair of traction bars are designed for use on Mustangs with stock rear-end applications with 2” or 3” lowering blocks and reverse eye leaf springs.
Vehicle Fitment:
- 1965-1973 Mustangs
Please Note: These traction bars will only work with 3" axle tubes.
California Residents: Proposition 65 Warning
Related Categories: Mustang Parts, Mustang Suspension, Mustang Traction Bars
