Classic Performance Products Street-Trac Traction Bars Pair 1965-1973 With 2" Or 3" Lowering Blocks
- Proudly Made in the USA!
- Laser-Cut Bent-Steel Mounts
- Self-Lubricating Bushings
- Reduces Stress on Leaf Spring
Pair of Classic Performance Products Street-Trac Traction Bars for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustangs with 2" or 3" Lowering Blocks.
When cornering or tackling on-road obstacles, your 1965-1973 Mustang needs all the help it can get! If your Mustang features 2” or 3” lowering blocks, then upgrade its suspension today with this Pair of Classic Performance Products Street-Trac Traction Bars (6473TB-L) from CJ Pony Parts!
Features and Benefits:
- For Stock Rear End Applications with 2” or 3” Lowering Blocks
- D-spec Bushings
- Offers Additional Ground Clearance
- Reduces Stress on the Leaf Springs
This Pair of Street-Trac Traction Bars (6473TB-L) made by Classic Performance Products are constructed from 1” 0.156-wall 4130 with 3/16” laser-cut bent-steel mounts. They also feature self-lubricating plastic D-type bushings and 3/4" rod ends. If your Mustang features a forward-slanted approach angle, then CPP has got you covered! The front mount has additional ground clearance in this case, so if your Mustang does hit an obstacle on the road, the angle approach will act as a skid plate to help the car lift itself over the obstacle.
These traction bars (6473TB-L) will help to reduce stress on the top of the leaf spring because the portion of the linkage that contacts the spring is a wider flat surface. Pivot positions are relocated to optimize weight transfer while reducing the spring load. Please note that this pair of traction bars are intended for use on Mustangs with stock rear end applications with 2” or 3” lowering blocks.
- 1965-1973 Mustang
California Residents: Proposition 65 Warning