Currie Steel Brake Line/ Hose Kit Universal For 9" Axle Housings
Highlights
- Rubber Brake Hoses
- Steel Hard Lines
- For 9" Axle Housings
- Made in the USA
Currie Universal Steel Brake Line and Hose Kit for 9" Axle Housings.
This Universal Steel Brake Line and Hose Kit (CE-6022) from Currie consists of two rubber brake line hoses and two lengths of steel hard line tubing. Designed for vehicles with a 9" Ford rear axle housing, these steel brake lines and rubber hoses transfer brake fluid from the master cylinder to the wheel cylinder or calipers for reliable stopping power.
Features and Benefits:
- Includes Two Rubber Brake Line Hoses
- Includes Two Lengths of Steel Hard Line Tubing
- For Use with 9" Ford Rear Axle
- Proudly Made in the USA!
More specifically, one of the hoses is designed for, and will easily bolt onto, the 3rd member studs of a 9" Ford rear axle. This hose is equipped with a 3/16" double flare bulkhead fitting at the frame end and a block at the housing end with two 3/16" double flare inlets.
The second hose is intended for universal mounting on any rear axle (where this hose provides enough travel). This second hose is equipped with a 3/16" double flare bulkhead fitting on the frame end and a brass distribution block on the housing end with a .270" mounting hole through it.
Please Note: Tube bending and flaring equipment is necessary for the installation of this kit.
California Residents: Proposition 65 Warning
