Edelbrock 2 Bar MAP Sensor For Pro-Flo 2 Systems

This 2 Bar MAP Sensor is designed by Edelbrock for use in their Pro-Tuner EFI systems and their Pro-Flo 2 systems, providing accurate manifold pressure readings. It features a round brass body with three (3) male pin-type terminals and a female connector. It is designed for a quick push-on installation. It also has 1/8-inch pipe threads that have pre-applied thread sealant. Using the included 6-inch wiring harness, this USA-made MAP sensor (36020) is configurable with most other aftermarket ECUs.

Features and Benefits:
- Fits Pro-Tuner EFI systems and Pro-Flo 2 Systems
- Provides accurate manifold pressure readings
- Male pin-type 3-terminal design with 1 female connector
- Round brass body with black connector
- 1/8" pipe thread (1/8-27 NPT)
- Pre-applied thread sealant
- Configurable to most aftermarket ECUs
- Push-on installation
- Includes 6" wiring harness
- Made in the USA

Please Note: The sensor should be mounted such that the connector side faces upward to avoid trapping water or condensation in the sensor tip, which will damage the sensor. Be sure to mount the MAP sensor at or as close to the intake manifold as possible.