Edelbrock Camshaft And Lifter Kit Torker-Plus 289/302



  • Hydraulic Flat Tappet
  • .472/.496 Lift
  • 214 Degree/224 Degree Duration
  • 112 Degree Lobe Separation

Edelbrock Torker-Plus Camshaft and Lifter Kit for 289 and 302 Engines.

If you're looking to upgrade your vehicle's street and drag race performance, CJ Pony Parts offers this Torker-Plus Camshaft and Lifter Kit from Edelbrock. This kit works with all 289 and 302 engines and will greatly improve your RPM and torque.

The Torker-Plus Camshaft is designed to work with Edelbrock's Torker II Intake Manifolds to take your performance form 2500 to 6500 RPM. The kit (P/N: 5022) includes this camshaft and a set of hydraulic flat tappet lifters to keep your intake valve open longer and allow your engine to work faster. Edelbrock recommends this kit for high-performance stret and drag applications, not for trucks or towing applications because of the slightly rough idle.

Edelbrock Kit 5022 Includes:
- Torker-Plus Camshaft
- Set of Hydraulic Flat Tappet Lifters
- Tube of Assembly Lube

Camshaft Specs:
- Duration @ .050 Intake/Exhaust:  214°/224°
- Lift @ Valve Intake/Exhaust:  .472"/.496"
- Lobe Separation:  112°
- Intake Center Line:  107°

- 1965-1973 Mustangs

Order this Edelbrock Torker-Plus Camshaft and Lifter Kit for your 289 or 302 Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account