ARP Camshaft Bolt Kit Pro-Series 12-Point 260/289/302



  • 8740 Chrome Moly Construction
  • Black Oxide Fastener Finish
  • Heat Treated To 200,000 PSI
  • Made In The USA
MSRP $6.59
You save 9%

ARP Pro-Series 12-Point Camshaft Bolt Kit for all 260, 289 and 302 Engines.

Camshaft timing issues can take all the pleasure our of a pleasure cruise. Rather than worrying about the camshaft timing in your 260, 289 or 302 engine, replace your hardware with this ARP 254-1001 Pro-Series 12-Point Camshaft Bolt Kit. Along with the ARP quality you’ve come to expect, this hardware features an oversized bolt head flange for cam button retention and reduced socket head size for easy installation and removal.

Designed to ensure the solid fitment, this kit also features increased material strength to overcome valvetrain harmonics and stress. This kit also delivers pre-load clamping force and assures positive timing gear register. This pro-series 12-point camshaft bolt kit comes with everything you need to end your camshaft timing worries for the life of your ride.

Features and Benefits:
- 8740 chromoly construction
- Increased material strength
- Increased pre-load clamping force
- Positive timing gear register
- Oversized bolt head flange
- Reduced socket head size
- Made in the USA
- Easy to install

- Fastener Material: 8740 Chromoly Steel
- Fastener Finish: Black Oxide
- Fastener Style: Bolt
- Fastener Head Style: 12-Point
- Thread Size: 3/8-16”
- Washer Included: Yes
- Fastener Yield Strength: 200,000 psi

- 1965-1995 Mustang
- 1966-1977 Bronco
- 1962-1979 F100

Please Note: While following the manufacturers recommended torque sequence, tighten the nuts to the ARP recommended torque specifications using ARP Ultra-Torque Fastener Assembly Lubricant.

Tech Tip: ARP recommends using the ARP Ultra-Torque Fastener Assembly Lubricant as opposed to motor oil or other low quality lubricants. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when insufficient lubricants are used.

Your engine is held together by a myriad of nuts, bolts and screws, which allow it to work despite the incredible pressures and forces acting upon it. However, what happens if that hardware fails, or you need to upgrade it to handle additional performance? With the hardware from ARP, you're getting the best products on the market, and those trusted by Formula 1, IndyCar, NHRA and NASCAR.

Order this ARP 254-1001 Pro-Series 12-Point Camshaft Bolt Kit for your 260, 289 or 302 Engine today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Engine, Mustang Camshafts & Valvetrain Components, Mustang Engine Hardware, Ford Bronco Parts

Installation Videos

Video Transcript

We’re here with an ARP Pro Series 12 Point Camshaft Bolt Kit fitting your 260, 289, or 302 engine. High-quality hardware from ARP is a great way to take your engine build to the next level. The ARP Pro Series 12 point Camshaft Bolt Kit is going to replace the factory bolt kit on your 289, 260, and 302 engine. It is made of heavy-duty 8740 chrome moly sealed construction with a black oxide finish, and is much stronger than the factory bolt, including an oversized flange and a reduced socket head size. This is going to be easy to install and a direct replacement for your factory hardware, and made right here in the USA.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account