Edelbrock Fuel Line And Filter Kit Single-Feed

Edelbrock:
8131
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 3.71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Fits Edelbrock Square Bore
  • 40 Micron Fuel Filter
  • Chrome Finish
  • Includes Necessary Hardware
$40.95

Edelbrock Single-Feed Fuel Line and Filter Kit for Performer or Thunder Series Carburetors.

If you’re wanting better performance from you vehicle's engine, you’ll want to pick up this Single-Feed Fuel Line and Filter Kit (8131) from Edelbrock.

Features & Benefits:
- Fittings are made of steel and finished in chrome plating
- Fuel line is made of steel and finished in chrome plating
- Fuel line inlet size: -6 AN
- Fuel filter included
- Outlet size is 5/8-20” with a banjo fitting attachment

Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetor. The drop-down design routes the fuel line on the passenger side of the carburetor below the linkage and choke housing. This kit includes a barbed end for a push-on 3/8” rubber fuel line, an aluminum fuel filter with a 40 micron filter element and the -6 AN male inlet. Manufactured of chrome plated steel, this kit includes a 5/8” -20 threaded banjo bolt with gaskets. Edelbrock single feed fuel line kits are the right choice for your classic car. A chrome plated steel manufacturing process gives the fuel line and filter a beautiful, resilient appearance that will withstand the abuse from the heat and elements it will be exposed to under the hood.

Please Note: This kit includes polished fuel filter.

Order an Edelbrock (8131) Single-Feed Fuel Line and Filter Kit with a Performer or Thunder Series Carburetor from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,
  • 1980,
  • 1981,
  • 1982,
  • 1983,
  • 1984,
  • 1985,
  • 1986,
  • 1987,

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I have a carter AFB 9637 carb on my 65 a code 289.I under stand my inlet fitting is 5/8 x 18 is it possible to get a banjo bolt to fit and will this pipe fit if i can?

Asked by: Kiwi Ray winter
This will not work.
Answered by: rk cjpp
Date published: 2017-10-19

I have a 65 Mustang,289, if I use this kit will I be able to use the stock stainless tube from the pump?

Asked by: sharkey483
This will only work with an edelbrock carb, this will not work with the stock tube from the pump.
Answered by: rk cjpp
Date published: 2017-04-18

what braided fuel line and fittings do you have to go from stock pump to this filter on 1968 302?

Asked by: jim828
Russell: 632050 is the braided line and russell fittings.
Answered by: BobH
Date published: 2017-01-27

68 coupe with the factory 302 and factory fuel pump, what gets me from this filter to the pump? Thanks.

Asked by: Bfredmonsky
You would need a braided fuel line and fittings.
Answered by: rk cjpp
Date published: 2016-01-14

What do I need to go from this kit down to the fuel pump?

Asked by: Bfredmonsky
That all depends on what year Mustang you are speaking of. What fuel pump and where it is located also plays a part in what you will need.
Answered by: CJPP Dave
Date published: 2016-01-07
  • y_2020, m_2, d_20, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_FL05, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 135.85ms
  • QUESTIONS, PRODUCT