Edelbrock Pro-Flo 4 EFI Upgrade Kit From Legacy Pro-Flo

Bring your classic build into the modern era with the Edelbrock Pro-Flo 4 EFI upgrade kit (35715). It converts legacy Pro-Flo EFI systems into the advanced Pro-Flo 4 platform. This upgrade enhances drivability, idle quality, and performance tuning by offering precision adjustments to ignition systems. Built for full fuel and spark control, the system leverages learning-capable technology to adjust fuel maps for optimal air-fuel ratios. Minimal setup is required, thanks to Edelbrock’s intuitive E-Tuner app.

Features and Benefits:
- Converts legacy Pro-Flo EFI to Pro-Flo 4
- Includes new ECU, harness, sensors, and IAC valve
- Full fuel and spark control with self-learning ECU
- Compatible with Edelbrock E-Tuner software
- Bluetooth-enabled tuning via iOS and Android
- Supports AFR, timing, fan, rev limit, and idle settings
- Comes with base calibrations for common builds
- Ideal for performance upgrades and restomods
- Compatible with naturally aspirated and forced induction setups
- Fits a wide range of classic Ford and GM vehicles

Vehicle Fitment:
- 1965-1985 Mustangs
- 1966-1977 Broncos
- 1948-1979 F-100s
- 1960-1987 Chevy C10s

Tech Tips:
- The customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors, as well as a Pro-Flo distributor, fuel pump, regulator, and fuel lines.
- Users must refer to the Calibration Matrix in the instructions for the required injector size, depending on engine cubic inches and HP requirements.
- Required injector sizes 29 lb./hr., 35 lb./hr., 42 lb./hr., and 60 lb./hr.
- Compatibility with forced induction applications requires 80 lb./hr. injectors.