Ford Performance Crate Engine Mustang 5.0L 4V Coyote 435HP With Manual Transmission Engine Harness and Flywheel

Ford Performance More Parts from Ford Performance
Truck Freight Shipping Applies
Ford Performance: M-6007-M50A
MSRP: $7,975.00
CJ's Low Price:
$6,999.00
Lift Gate Required: Choose 'Yes' if you will need lift gate service. Choose 'No' if you have a loading dock for truck freight delivery.
1558656000 62006
Add this part to your order to go along with your new crate engine!
CJ's Low Price:
$1,599.99
Qty
Earn 3499 RPM Points What's this?
Ford Performance Crate Engine Mustang 5.0L 4V Coyote 435HP With Manual Transmission Engine Harness and Flywheel
Ford Performance

Product Description

Ford Performance 435 Horsepower 5.0L 4V Coyote Mustang Crate Engine with a Manual Transmission Engine Harness and Flywheel.

This all-new, all-aluminum Ford Performance 2015-2017 5.0L Coyote crate engine is a modern 5.0L 32-Valve DOHC V8 that uses advanced features to deliver a whopping 435 HP @ 6500 RPM and 400 ft-lb.+ TQ @ 4250 RPM on premium fuel. This is achieved using features such as Twin Independent Variable Camshaft Timing (Ti-VCT) which allows the timing of the camshafts to adjust during different RPM intervals for optimum performance output.

This lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance. This Ford Performance Crate engine will also fit most newer and older Mustangs, even models going all the way back to 1965!

435HP 5.0L Crate Engine Specifications:
- High-Performance, 5.0-Liter Four-Valve Ti-VCT V8 Engine
- 435 Horsepower @ 6500 RPM / 400 ft-lbs of Torque @ 4250 RPM
- Displacement 302 Cubic Inches
- 11.0:1 Compression Ratio
- Hypereutectic Aluminum Pistons
- Forged Steel Connecting Rods
- Forged Steel Crankshaft
- Aluminum Block
- 8qt Capacity Oil Pan
- Tuned Composite Intake Manifold Provides Efficient Air Delivery and Weight Savings
- 80mm Single Bore "Drive By Wire" Throttle Body With Variable Runner Control
- Aluminum Cylinder Heads, DOHC, Four Valves Per Cylinder, Variable intake and Exhaust Camshaft Timing
- Mustang GT 409 Stainless-Steel Tubular Exhaust Manifold On The PASSENGER SIDE ONLY
- Actual Engine weight: 444 lbs.

*A vehicle harness and PCM is not included. Use Ford Performance's new wiring, PCM and installation kit (M6017504V) designed for street rod or project car installation.
*Does not include an alternator, use Ford Performance's alternator kit (M8600M50BALT).
*Does not come with engine covers, use Ford Performance's 5.0L engine cover kit (M9680M50A).

Tech Tip: Engine mount bosses and bell housing mount pattern common to 4.6L modular engines.

Please Note: This Ford Performance 435 Horsepower 5.0L 4V Coyote Mustang Crate Engine includes a Manual Transmission Engine Harness and a Flywheel.

By buying your Ford Performance (formerly Ford Racing) parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. We believe that offering top quality products such as Ford Performance crate engines validates our commitment to helping our customers get the most pleasure and satisfaction from Mustang ownership.

Order a Ford Performance 435 Horsepower 5.0L 4V Coyote Mustang Crate Engine from CJ Pony Parts today!

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 5ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Is there a transmission recommended to go along with this coyote engine that would fit a 66 mustang?

Asked by: Izzard21
A 4r70w or a T-56 will work, The transmission tunnel will have to be modified.
Answered by: rk cjpp
Date published: 2019-05-16

with my 2001 ford mustang G.T. will there be much moding needed to make this combination mount in and work? (Calvin)

Asked by: Calvin 123
Yes, pretty much everything will need changed or modified, fuel , cooling, exhaust systems and wiring.
Answered by: rk cjpp
Date published: 2019-04-26

Will this fit in a 1969 Mach 1?

Asked by: Jackie26
It would require major modifications to fit.
Answered by: rk cjpp
Date published: 2019-04-07

Will it fit in a 1998 mustang gt

Asked by: Deborah32
Yes it will physically fit but would not be a direct swap. All of the sub systems, cooling, exhaust, electrical and fuel etc. will have to be modified or changed.
Answered by: rk cjpp
Date published: 2019-03-16

will this engine work with my 2012 5.0 ecm? i have heard both ways that it will and wont.

Asked by: Travis201250
No it will not work, you will need this control pack. https://www.cjponyparts.com/ford-performance-control-pack-4v-5-0l-coyote-manual-transmission-2015-2017/p/M6017504V/
Answered by: rk cjpp
Date published: 2019-03-01

Do you ship to Australia if so is there a phone number so I can talk to someone, thank you

Asked by: Oscar
Please call toll free at 1-800-888-6473.
Answered by: rk cjpp
Date published: 2019-02-06

What manual transmission does this package include? 

Asked by: DoubtingSnake3
This does not include a transmission. It includes a manual transmission engine harness and flywheel.
Answered by: rk cjpp
Date published: 2019-02-26

Is there a list of additional install kits need to complete this install on a 1989 mustang gt?

Asked by: Brian
Since that would be a custom install there is no parts list for any specific vehicle.
Answered by: rk cjpp
Date published: 2018-12-14
  • y_2019, m_5, d_24, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_120
  • loc_en_US, sid_M6007M50A, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 140.04ms
  • QUESTIONS, PRODUCT

You Might Also Like