Ford Racing Gen 4X 5.0L Coyote Crate Engine 460HP
Highlights
- Provides 460 Horsepower
- Hypereutectic Pistons
- Composite Intake Manifold
- 9.5 Quart Steel Oil Pan
Ford Racing 460HP Crate Engine for Ford Vehicles with a 5.0L Coyote Gen 4X Engine.
The Ford Racing Gen 4X 460HP Crate Engine (M-6007-M50H) is a powerhouse ideal for custom race builds and GT Mustangs. This crate engine delivers an impressive 460 horsepower and 420 lb.-ft. of torque. The engine is built with hypereutectic aluminum pistons, sintered steel connecting rods (used in the Boss 302 Mustang), and a forged steel crankshaft for exceptional durability and performance.
Features and Benefits:
- Ideal for custom race and project car builds
- 460 hp and 420 lb.-ft. of torque
- 12:1 compression ratio
- Hypereutectic aluminum pistons
- Sintered steel connecting rods
- Forged steel crankshaft
- Single 80 mm "drive-by-wire" throttle body
- 9.5-quart steel oil pan
- Composite lightweight intake manifold
- Mustang GT 409 stainless steel exhaust manifold
- Engine mount bosses and bell housing mount pattern common to 5.0L modular engines
- Weighs 445 lbs. without front accessory drive components
The single 80 mm "drive-by-wire" throttle body and composite lightweight intake manifold enhance efficiency and responsiveness. Equipped with a 9.5-quart steel oil pan and a Mustang GT 409 stainless steel exhaust manifold (right side only), this engine is designed for robust performance. Engine mount bosses and bell housing mount patterns are consistent with 5.0L modular engines, ensuring compatibility and ease of installation.
Please Note:
- The driver-side exhaust flange utilizes a 5.2L pattern and will not work with any Gen 1, 2 or 3 Coyote exhaust manifolds.
- Does not include vehicle harness or PCM.
California Residents: Proposition 65 Warning
Related Categories: F-150 Engine Assemblies, Mustang Coyote Crate Engines & Cylinder Blocks, Bronco Crate Engines & Cylinder Blocks, F-100 Crate Engines & Engine Blocks
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
truck_freight_flat_product Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following F-150 years:
This product will fit the following Mustang years:
- 1964.5,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
- 1988,
- 1989,
- 1990,
- 1991,
- 1992,
- 1993,
- 1994,
- 1995,
- 1996,
- 1997,
- 1998,
- 1999,
- 2000,
- 2001,
- 2002,
- 2003,
- 2004,
- 2005,
- 2006,
- 2007,
- 2008,
- 2009,
- 2010,
- 2011,
- 2012,
- 2013,
- 2014,
- 2015,
- 2016,
- 2017,
- 2018,
- 2019,
- 2020,
- 2021,
- 2022,
- 2023,
- 2024,
- 2025,
- 2026,
