Ford Performance Control Pack With Speed-Dial Wiring For 2011-2014 5.0L Coyote Crate Engine With Manual Transmission

Ford Performance:
M-6017-A504VB

Highlights

  • Replaces Stock Body Harness
  • For Manual Transmissions Only
  • Includes Obd-II Port
  • Enhances Performance
MSRP $2,475.00
$2,099.99
You save 15%
Earn
points.
Product Description

Ford Performance Control Pack with Speed-Dial Wiring for 2011, 2012, 2013 and 2014 5.0L Coyote Crate Engines with a Manual Transmission.

Looking to swap your 2011-2014 5.0L Coyote Crate Engine into another, older model Mustang with as little trouble as possible? Then this Ford Performance M-6017-A504VB Control Pack with Speed-Dial Wiring is for you! This control pack harness replaces your stock body harness and includes all of the supporting materials required to keep your engine move as easy as possible.

Features and Benefits:
- Replaces stock body harness
- Designed to work on any vehicle (excluding a 2011-2014 Mustang)
- For manual transmissions
- Includes wiring to hook up Speedometer Adjuster Speed-Dial
- Wiring harness includes OBD-II port
- Can diagnose any installation problems
- Enhances performance

Control Pack Includes:
- OBD-II Diagnostic Port to Assist in Vehicle Calibration Upload and Problem Diagnosis
- Electronic Throttle Control Accelerator Pedal
- PCM with Ford Racing Calibration
- HEGO Sensors
- MAF Sensor with Bolts
- Unique Downsized Power Distribution Module
- Air Box
- Inlet Tube
- Speedometer Adjuster Speed-Dial Wiring
- Speedometer Adjuster Speed-Dial is not included

This control pack will work on either an automatic or manual transmission. If your transmission is an automatic it must not have a PCM to control the transmission. Included is wiring to hook up a Ford Performance Speedometer Adjuster Speed-Dial (sold separately). Your new control pack includes everything you need to run your 2011-2014 Coyote Crate Engine in your classic pony. Eliminating the throttle cable, the included accelerator pedal is electric preventing it from getting damaged under the engine bay. For easy problem diagnosis during or after your project, the included wiring harness features an OBD-II port.

*PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system. Installation of this PCM in a 2011-2014 Mustang GT will result in a no-start condition.

Please Note: A Speedometer Adjuster Speed-Dial is not included.

If you're looking for parts for your Mustang, you should start by looking at all of the Mustang parts that CJ Pony Parts offers from Ford Performance (formerly Ford Racing). By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years!

Order this Ford Performance M-6017-A504VB Control Pack with Speed-Dial Wiring for your 2011, 2012, 2013 or 2014 5.0L Coyote Crate Engine with a Manual Transmission today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Electrical & Wiring, Mustang EFI Engine & Injector Harnesses, Mustang Wiring Kits, Mustang Engine

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles
Installation & Fitment

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account