Holley Sniper EFI 2300 Self-Tuning Master Kit Black Ceramic Finish

Holley:
550-850K

Highlights

  • Supports Up To 350HP
  • Features 2 100Lb/Hr Injectors
  • 2300 Style Carburetor Flange
  • Self Tuning ECU
MSRP $1,664.00
$1,496.95
You save 10%

Holley Black Ceramic Finish Sniper EFI 2300 Self-Tuning Master Kit.

If you’re looking to upgrade your classic car’s engine for better performance, look no further than this Black Ceramic Finish Sniper EFI 2300 Self-Tuning Master Kit (550-850K) from Holley. This kit is priced to make sure you’re getting the high-quality pieces you need and still have the money to finish the restoration of your vintage car!

Features:
- Bolts on a 2 barrel intake manifold
- 2300 style carburetor flange
- Black ceramic finish
- Supports up to 350hp with two 100 lb/hr injectors
- Equipped with C4/C6 transmission kickdown lever
- Accepts 5-1/8” OEM or aftermarket air cleaner assemblies
- Throttle body mounted ECU
- Integrated ignition timing control
- Only 4 wire connections required
- Internal fuel pressure regulator (preset to 58.5 PSI)
- High-resolution full color touchscreen (initial setup, tuning and gauge displays)
- Simple calibration wizard (no laptop required)
- Self-tuning ECU
- Included genuine Bosch LSU wideband oxygen sensor (realtime fuel map)
- OEM Style TPS (Throttle Position Sensor) IAC (Idle Air Control Valve)
- Clamp-on oxygen sensor kit for 2-1/4” exhaust
- Holley Sniper EFI software
- Printable throttle body flange template

Kit Includes:
- Holley Sniper EFI 2300 throttle body
- High-resolution full color touchscreen tablet
- EFI wiring harness
- Internal fuel pressure regulator
- Bosch LSU wideband oxygen sensor
- TPS (throttle position sensor)
- IAC (idle air control valve)
- Clamp on oxygen sensor kit
- Holley Sniper EFI software
- Printable throttle body flange template
- Fuel pump
- Fuel filter
- Fuel lines
- Fuel line Fittings
- Fuel hose Clamps

Throttle Body Specs:
- CFM: 580
- Finish: Black Ceramic
- Flange Style: 2300
- Fuel Pressure: 58.5 PSI
- Height: 3.28”
- Injector Size: 100 lb/hr @58.5 PSI
- Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6)
- Map Sensor: 2 bar
- Max Horsepower Rating: 325 Naturally Aspirated
- Throttle Bore: 1-11/16”

This Holley Sniper EFI 2300 Master Kit is ideal for any vehicle that came standard with a 2300 bore intake manifold. It’s economically priced, so you can get all the benefits of EFI and still be able to finish upgrading your ride. This Holley self-tuning kit will eliminate hesitations, cold starts, vapor lock and flooding. You’re sure to love the performance benefits from this black ceramic finished EFI 2300 Self-Tuning Master Kit!

Vehicle Applications:
- 1965-1973 Ford Mustang
- 1966-1977 Ford Bronco
- 1973-1977 Ford F-100
- 1960-1987 Chevy C10

Order a Holley (550-850K) Black Ceramic Finish Sniper EFI 2300 Self-Tuning Master Kit from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account