Holley Sniper EFI 2300 Self-Tuning Master Kit Shiny Finish

Holley:

550-849K

Rating:

75% of 100

1 Review Add Your Review

Highlights

Supports Up To 350HP
Features 2 100Lb/Hr Injectors
2300 Style Carburetor Flange
Self Tuning ECU

MSRP $1,556.00

$1,399.95

You save 10%

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

Holley Shiny Finish Sniper EFI 2300 Self-Tuning Master Kit.

If you want an easy and cost-effective way to upgrade your vehicle's engine, than this complete Holley Shiny Finish Sniper EFI 2300 Self-Tuning Master Kit (550-849K) is right up your alley! Go ahead and order your kit from CJ Pony Parts today!

Holley Sniper EFI 2300 Master Kit Features:
- Bolts on a 2 Barrel Intake Manifold
- 2300 Style Carburetor Flange
- Supports up to 350hp with Two 100lb/hr Injectors
- Equipped with C4/C6 Transmission Kickdown Lever
- Accepts 5-1/8" OEM or Aftermarket Air Cleaner Assemblies
- Throttle Body Mounted ECU
- Integrated Ignition Timing Control
- Only 4 Wire connections Required
- Internal Fuel Pressure Regulator (Preset to 58.5 PSI)
- High Resolution Full Color Touchscreen (Initial Setup, Tuning and Gauge Displays)
- Simple Calibration Wizard (No Laptop Required)
- Self Tuning ECU
- Included Genuine Bosch LSU Wideband Oxygen Sensor (Realtime Fuel Map)
- OEM Style TPS (Throttle Position Sensor) IAC (Idle Air Control Valve)
- Clamp-On Oxygen Sensor Kit for 2-1/4" Exhaust
- Holley Sniper EFI Software
- Printable Throttle Body Flange Template

Holley understands that your vehicle may need some updates or upgrades over the years, so if you're looking to convert from a carburetor to an EFI system instead, than you'll want to grab this complete Master Kit! The updated Sniper EFI 2300 Kit features a 2300-style flange style and will eliminate cold starts, hesitations, vapor lock and flooding in your favorite vehicle. This upgraded and comprehensive package includes all of the necessary fuel components as well, so you won't have to run out mid-project to grab an extra hose or clamps. You'll notice an immediate improvement in overall performance, so don't wait and order your complete kit now from CJ's!

Sniper EFI 2300 Master Kit Includes:
- Holley Sniper EFI 2300 Throttle Body
- High Resolution Full Color Touchscreen Tablet
- EFI Wiring Harness
- Internal Fuel Pressure Regulator
- Bosch LSU Wideband Oxygen Sensor
- TPS(Throttle Position Sensor)
- IAC (Idle Air Control Valve)
- Clamp on Oxygen Sensor Kit
- Holley Sniper EFI Software
- Printable Throttle Body Flange Template
- Fuel Pump
- Fuel Filter
- Fuel Lines
- Fuel Line Fittings
- Fuel Hose Clamps

*This complete Master Kit contains all of the necessary fuel components--no other parts or pieces needed.

Throttle Body Specs:
- CFM: 580
- Finish: Shiny
- Flange Style: 2300
- Fuel Pressure: 58.5 PSI
- Height: 3.28"
- Injector Size: 100 lb/hr @58.5 PSI
- Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6)
- Map Sensor: 2 Bar
- Max Horsepower Rating: 325 Naturally Aspirated
- Throttle Bore: 1-11/16"

The carburetor on your classic car or truck is a part that you rely upon to work. Without it, your vintage vehicle isn't going anywhere. That's why you want to make sure you get a high quality part when you replace or upgrade your carburetor, and no carburetor is going to have higher quality than the products from Holley.

Pick up this premium and extensive Holley (550-849K) Shiny Finish Sniper EFI 2300 Self-Tuning Master Kit today from CJ Pony Parts!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
1965 and older U.S. manufactured California certified vehicles

1967 and older U.S. manufactured federally certified vehicles

Installation & Fitment