Holley VR2 Fuel Pump Brushless W/Controller

Dominate the track or your daily commute with the VR2 Brushless Fuel Pump by Holley (12-3000-2)! Boasting a 335 GPH at 13.8 volts, this fuel pump ensures your carbureted or EFI fuel system receives a constant, steady flow of fuel. Whether you're tearing down the track or cruising the streets, the VR2 delivers unparalleled performance without compromise. The VR2 stands out with its compatibility with E-85, gasoline, and methanol. This pump doesn't just adapt; it excels, ensuring your vehicle runs at its peak, regardless of your fuel choice. This pump is designed to withstand the rigors of both race day and everyday use thanks to its robust aluminum construction and sleek black finish.

Features and Benefits:
- For carbureted and EFI fuel systems
- Designed to work with race cars and daily drivers
- 335 GPH at 13.8 volts
- Capable of 130 PSI 
- High pressures and flows with low amperage draw
- 38 Amp Draw
- (2) Controllers for pump control
- Low-speed control for low fuel consumption
- Full-speed control for high fuel consumption
- Compatible with E-85, gasoline, and methanol
- Can be fully submerged in the fuel cell or chassis
- Brushless technology 
- Twin-screw rotor design
- Aluminum construction
- Black finish

Capable of reaching high pressures up to 130 PSI, the VR2 ensures your system gets the fuel it needs without drawing too much amperage. Its brushless technology and twin-screw rotor design exemplify cutting-edge engineering, providing reliability and longevity where it matters most. The VR2 takes customization a step further with two controllers for meticulous pump control. A low-speed control optimizes fuel consumption for those idle moments or city drives, while a full-speed control unleashes the full potential of your fuel pump during high-demand situations. Designed with versatility in mind, the VR2 can be fully submerged in the fuel cell or chassis-mounted, offering flexible installation and seamless integration!

Specifications:
- Supports up to 4400 EFI or 4800 Carb. HP
- Proven for 18.5-Volt Compatibility
- 9.5” long, 4.75” wide, 2.75” tall
- 10 AN O-ring Inlet and Outlets
- 1250 LPH

Additional Notes:
- These pumps do not have an internal bypass. 
- A bypass-style regulator and return line are required.
- The correct fitting is a contoured port fitting with an O-ring seal.