Maximum Motorsports K-Member Package With 10" 325lb Springs For Use With Koni Struts Mustang 5.0L 1990-1993

Maximum Motorsports:
MMKMP-46 325-10


  • Improved Front End Handling
  • Reduced Front Weight
  • Tubular Steel Construction
  • Adjustable Ride Height

Maximum Motorsports K-Member Package With 10" 325lb Springs for 1990, 1991, 1992 and 1993 5.0L Mustangs and Koni Struts.

The Maximum Motorsports K-Member Package (MMKMP-46 325-10) replaces the heavy, inefficient factory suspension components in your 1990-1993 Mustang. In their place, this K-Member package will improve suspension geometry while reducing the front end weight over 40lbs. Factory suspension components are fine for daily transportation, but if you want to be competitive on the track, Maximum Motorsports can help you out!

Features and Benefits:
- Improved Suspension Geometry
- Adjustable Ride Height
- Proudly Manufactured in the USA!
- Black Powder Coated Finish
- Weight Savings (40lbs.-Plus Over Stock Components)
- Includes Coil Over Conversion Kit for use with Koni Struts
- High Quality Maximum Motorsports Engineering

Both the Maximum Motorsports K-Member and control arms feature tubular steel construction for improved strength and weight reduction, with gussets placed in critical areas to prevent damage. This stiff design will prevent flexing, to improve steering response and handling. The K-member is 26% lighter than the factory K-Member found on your 1990-1993 Mustang. Motor mounts can be mounted in the stock position or rearward one inch to improve weight distribution. Front Lower Control Arm Mounts are shifted 0.75” straight forward to increase positive caster and further improve weight distribution.

Maximum Motorsports assembles the control arms with OEM low-friction ball joints. The Front Lower Control Arms will improve steering response and deflect less with Urethane pivot bushings. The Reverse-Offset Front Lower Control Arms will move the ball-joint rearward, along the centerline of the Mustang. These arms will maintain the stock fore/aft tire location.

The Front Coilover Kit includes threaded sleeves that will only work on Koni Front Struts. The kit comes with 10” Springs, with a spring rate of 325lbs. The 10" 325lb Springs are great for Mustangs that see heavy street use and entry-level performance handling at the track. This kit allows you to adjust the ride height so you can dial in your stance with the included tool. Maximum Motorsports includes all the necessary components to completely install Front Coil Overs on your 1990-1993 Mustang.

Please Note: The Koni Struts are NOT included with this Maximum Motorsports K-Member Package (KONI27).

This Kit Includes:
- K-Member
- K-Member 2-Point Brace
- Reverse-Offset Front Lower Control Arms
- Bumpsteer Kit
- Caster Camber Plates
- Aluminum Steering Rack Bushings
- Short Sway Bar End Links
- Sway Bar Relocation Kit
- Urethane Sway Bar Bushings
- Coilover Kit (10-Inch Springs with a 325lbs. Spring Rate) (For use with Koni Struts)

Vehicle Fitment:
- 1990-1993 5.0L Mustang

ATTENTION: Due to increased demand for this hand built product, this part may take up to eight weeks for shipment.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account