Modern Driveline Adapter Plate Adapts a 1994-2004 T-5 Transmission to a 1983-1993 T-5 Bellhousing.If you are looking to install a 1994-2004 T-5 5-speed manual transmission into your 1983-1993 Mustang using your factory T-5 bellhousing, this adapter will help you get the job done. The adapter plate installs between the transmission and the bellhousing.
Includes four longer metric bolts.
Product ReviewsWrite a review
Will I have to modify my original driveshaft?
You will need a 50" driveshaft which we offer.
Date published: 2016-05-18
What adapter do I need to run a tr3650 to t5 bell housing and which clutch and pilot bearing to use
We don't have an adaptor for the TR3650.
Date published: 2016-05-17
How much thickness it is?
Date published: 2016-03-04
i have a T 45 tranny from a 96 to 98 Mustang 4.6 GT. Is this the adapter i need to bolt it up to a stock 88 to 95 Mustang 5.0 bell housing? what clutch, pressure plate and throw out bearing will i use with this setup? thanks
This adapter is for t-5 transmissions only.
Date published: 2016-02-29
I am putting a project together and I have a 1979 302, a 15200 lakewood bellhousing and a 1963 ford side loader trans. I also have a T 5 from a 2000 mustang. and I am thinking of using the T5 is there an adaptor for this?
Unfortunately we do NOT offer anything like that at the moment.
Date published: 2015-11-13
Is the md-401-2110 adapter plate what I need for my six bolt manual transmission bellhousing in order to mount my B/W T5. The bellhousng is behind a 84 ford 302. the original tranny was a 4 spd srod
This should be exactly what you are looking for.
Date published: 2015-10-22
I have a F100 with a 300 cid with a bad 3 speed toploader. I want to replace it with a SROD that I already have. The SROD's input shaft is about 11/16" longer than the toploader. Will this work for a input shaft spacer?
You Might Also Like
CJ's Low Price:$28.99
CJ's Low Price:$1,952.99