Edelbrock Pro-Flo 4 EFI ECU/ Electronics Kit For Ford 289/ 302

Modernize your vintage Ford with this ECU and electronics kit (35717) for 289/302 engines. This system is perfect for enthusiasts who already have a compatible EFI induction setup and want to unlock the performance and control of Pro-Flo 4 EFI without replacing their existing hardware. With full fuel and spark control, the Pro-Flo 4 system adapts to your engine’s needs with real-time tuning capabilities. The Bluetooth-enabled E-Tuner app allows you to fine-tune AFR, ignition curves, idle speed, and rev limiters.

Features and Benefits:
- Designed for Ford 289/302 engines
- Retains your existing EFI induction system
- Includes ECU, sensors, harness, and distributor
- Supports both fuel and spark control
- Self-learning ECU maintains target AFR
- Bluetooth-enabled E-Tuner app for mobile tuning
- Base maps included for fast setup
- Customizable ignition curves and acceleration tuning
- Compatible with naturally aspirated and boosted setups

Vehicle Fitment:
- 1965-1985 Mustangs
- 1966-1977 Broncos
- 1948-1979 F-100s

Tech Tips:
- The customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors, as well as a Pro-Flo distributor, fuel pump, regulator, and fuel lines.
- Users must refer to the Calibration Matrix in the instructions for the required injector size, depending on engine cubic inches and HP requirements.
- Required injector sizes 29 lb./hr., 35 lb./hr., 42 lb./hr., and 60 lb./hr.
- Compatibility with forced induction applications requires 80 lb./hr. injectors.