FiTech Go EFI 4 Power Adder Master Kit 600HP With Matte Black Finish And In-Line Fuel Pump

FiTech:
31004

Highlights

  • Supports Up To 600HP
  • 255Lph External Fuel Pump
  • Includes 2.5 Bar Map Sensor
  • Matte Black Finish
MSRP $1,498.99
$1,494.99
You save $4.00
Earn
points.

FiTech 600HP Go EFI 4 Power Adder Master Kit with a Matte Black Finish and In-Line Fuel Pump for 4-Barrel Intake Manifolds.

If you’re looking for a great, reliable way to switch your turbo, supercharger or nitrous application from carbureted to EFI, it’s time to pick up this FiTech 600HP Go EFI 4 Power Adder Master Kit with a Matte Black Finish and In-Line Fuel Pump that’s now available from CJ Pony Parts!

Master Kit Features & Benefits:
- All Self-Tuning Features of Go EFI Systems with Extra PRO Features Needed for Higher Output Engines
- Perfect for the Enthusiast Who Wants More Out of Their System or for Future Upgrades
- Perfect for Power Adder Engine or Normally Aspirated Engine (for Future Upgrades)
- Quick and Easy Initial Set-Up: Simple Touch-Screen Selections Have You Up and Running in Minutes
- ECU Takes Over Immediately After Start-Up and Provides Vehicle with Optimal Tune
- Capable of 25lbs. of Boost Right Out of Box
- Can Be Used in Blow-Thru Turbo or Blower Application or on Single Roots-Style Supercharger
- Allows You to Run Single Stage of Wet Nitrous and Control A/F and Ignition Timing
- Nitrous Control with Safety Features and Accessories for Nitrous Tuning
- Nitrous- and Boost-Specific Target A/F Target Options
- Wet Flow Technology and Unique Annular Swirl Discharge Fuel Distribution to Ensure Complete Fuel Atomization
- Nitrous and Boost Timing Retard
- Ignition Timing Can be Controlled and Adjusted On-the-Fly from Touch-Screen Controller (Ignition Timing Control is Optional and Not Required)
- Built-In Fuel Pressure Regulator: No Extra Regulator to Mount on Firewall
- Four (4) Hi-Flow 600 HP Injectors
- Boost-Ready Throttle Body and ECU 2.5 Bar MAP Sensor Good for 21.7 PSI
- Throttle Bodies Have Universal Base to Fit Any 4-BBL Manifold
- Throttle Linkage Suits Most Transmissions
- Advanced Hand-Held Tuning Mode Enabled
- Pro Laptop Software: Complete Tuning for Professional Tuners
- Basic Installation: 4 Wires and 2 Sensors to Install
- Matte Black Finish

In-Line Fuel Pump Kit Features & Benefits:
- 225 LPH External In-Line Fuel Pump Capable of Handling Up to 600HP
- Includes Fuel Lines, Fittings, Two (2) Billet Fuel Filters and 20' of Premium-Quality EFI-Grade Fuel Hose for Inlet and Return Line Between Fuel Tank and Engine
- Includes 100 Micron Pre-Filter and 30 Micron Post-Filter
- Includes Push-Lock Style Hose and Hose Ends for Easy Assembly
- Includes Pump Mounting Brackets and Hardware

This FiTech (31004) 600HP Go EFI 4 Power Adder Master Kit with a Matte Black Finish and In-Line Fuel Pump is a great choice for the enthusiast who wants more out of their system or for one who’s planning future upgrades! This kit offers the same self-tuning features of FiTech’s Go EFI Systems but with extra PRO features needed for higher output engines like yours. The initial set-up is quick and easy thanks to the simple touch-screen selections, and then the ECU takes over immediately after start-up to give your vehicle the best tune possible. This kit is capable of 25 lbs. of boost right out of the box and can be used in blow-thru turbo or blower applications or on single roots-style superchargers. You can control ignition timing if you want, and it can be easily adjusted on-the-fly if needed! The included boost-ready throttle bodies have a universal base that’ll fit most 4-bbl intake manifolds, and the throttle linkage suits most types of transmissions.

*When using this fuel pump kit, a return line to the fuel tank is required.

Order a FiTech (31004) 600HP Go EFI 4 Power Adder Master Kit with a Matte Black Finish and In-Line Fuel Pump for your 4-Barrel Intake Manifold from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Engine, Mustang Fuel Lines, Mustang Fuel Pumps & Filters, Mustang Carbureted Fuel Pumps

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
  1. FI58013
    $638.00
  2. FI58006
    $638.00
Add to Cart