Flowmaster 40 Series Muffler 2-1/4

Flowmaster:
42443

Highlights

  • Aggressive Exhaust Tone
  • Designed For Street And Strip
  • 40 Series Muffler
  • Improves Hp And Fuel Economy
MSRP $112.00
$89.95
You save 20%
Earn
points.
Product Description

Flowmaster 40 Series Universal 2-1/4" Muffler.

Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these Flowmaster mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well asutside of it. So, if you want more power and less noise, then you've gotta get these Flowmaster mufflers

Offset Inlet & Outlet
Length - 19"
Width - 9.75"
Height - 4

When you're looking for an exhaust for your 1964-2017 Mustang, every owner needs to check out Flowmaster's exhaust systems and mufflers. Flowmaster is a manufacturer of just about any part you need for your Mustang's exhaust, from full exhaust systems and exhaust kits, to mufflers and accessories. Flowmaster is widely known for their distinctive 'Flowmaster sound,' which is available in mild, moderate and aggressive tones. CJ Pony Parts is proud to partner with Flowmaster, so you know you can find the perfect muffler or exhaust system for your Mustang right here today! Browse the dozens of Flowmaster products CJ's proudly offers today!

Order this high-quality Flowmaster 40 Series Universal 2-1/4" Muffler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Exhaust, Mustang Mufflers, Restomod Exhaust, C10 Mufflers

Installation & Fitment

Installation Videos

Video Transcript

Bill: We have a special guest in our studio today. Alex, the regional sales manager from Flowmaster, is here to tell us about the company. Alex thanks for coming.

Alex: Thank you for having me Bill. How are you doing today?

Bill: I'm doing good. We all know the two chamber Flowmaster. If you had a Fox Body back in the day you had some Flowmasters on it. But what else can you tell us about your company?

Alex: Well, Flowmaster is an aftermarket performance exhaust manufacturer, Bill, that started off on the racetracks. Ray Flugger, the founder of the company, designed mufflers for racers that were being hammered for excessive noise limits. Flowmaster presents that opportunity where you're able to reduce those dB levels without having to hurt or kill performance. Flowmaster is also one of the most significant speed parts of all time where we are actually an innovative product different from the standard that's out there.

Bill: The two chamber Flowmaster that was the original product he was selling out of a suitcase.

Alex: The 40 Series, except with some slight modifications on the case itself. Back then it was a square case and now it's more of a round oval.

Bill: The other mufflers you have here, what can you tell me about them?

Alex: Here we have a 50 Series Delta Flow to the far right, which is a three chamber design, a little more subdued, a little mellower for those that are looking for less interior resonance. In the middle here we've got a Super 40, which is a two chamber design, a little thicker, a little wider, which is set up to handle higher output applications. To the far left we've got a Super 44, which is the latest and greatest two chamber design that Flowmaster has released in recent years.

Bill: Is that still based off of the original design?

Alex: That is correct.

Bill: I know Flowmaster has a lot of kits available for the 2005 and newer Mustangs. What can you tell me about these two kits you brought with you today?

Alex: Well, Bill here we've got a Force II exhaust system from Flowmaster. It's a direct bolt on axle back 409 stainless steel with a limited lifetime warranty, fully constructed here in the U.S. It's got the rolled edge stainless steel tip with the nice four inch diameter. All of the hardware, everything you need, is included within the kit so you don't have to buy any additional accessories.

This would probably take you an hour and a half to install out of your own garage on a weekend. Very subdued, very mellow kind of tone, something designed for someone who's looking for more of a performance aspect with a little bit of rumble, nothing too wild, nothing too crazy.

Over here on the right we've got the Outlaw System. The Outlaw is very noticeable, very aggressive. It's the 'hear me from a mile away' type of sound, something I would only recommend to those who are fully aware of what they're getting. It utilizes an Outlaw race muffler, basically a muffler that was designed for race applications that are required to run mufflers without a specific dB limit. Again, I only recommend it to those that are looking for the aggressive tone from Flowmaster. It is fully built out of stainless steel, lifetime warranty as well.

Bill: The Outlaw is available for '05 and up for both the 5.0 liter and the 4.6 liter cars?

Alex: That is correct.

Bill: We know Flowmaster that has systems that fit all year Mustangs, but I heard you guys are getting in other parts of the exhaust as well?

Alex: That's right, Bill. We actually just released a full line of stainless steel headers, ceramic coated, very high end piece. They look great. It'll compliment the rest of your exhaust components. We also just released a full line of catalytic converters, both 49 state and carb certified.

Bill: If you're looking for that classic Flowmaster sound, it doesn't matter what year your car is, Flowmaster has a system that will fit your Mustang.

Vehicle Fitment

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account