Ford Racing Aluminum Driveshaft HD Mustang 5.0L 1979-1995/ V6 1979-2004

Reduce driveline weight and improve throttle response with this HD Aluminum Driveshaft from Ford Racing! These driveshafts offer a durable alternative to heavier steel options.

Features and Benefits:
- Made from 6061-RT62 Aluminum
- 3.5" Tubing Diameter
- Improves Acceleration
- Decreases Unsprung Weight & Driveline Vibrations
- 0.114" Wall Thickness
- 28 Spline Slip Yoke
- 1330 U-joints
- 45.5" Long (CL to CL of U-joints)
- Made in the USA

Shave off some weight and get the power down to the ground correctly on your 1979-1995 5.0L V8 Mustang or 1979-2004 V6 Mustang by purchasing this Ford Racing Heavy-Duty Aluminum Driveshaft. Your Mustang will get a reduction in unsprung weight and driveline vibration to not only get more power to your wheels but also enjoy a smoother ride.

This driveshaft from Ford Racing has a heavy-duty 6061-RT62 aluminum construction that is significantly stronger than its factory counterpart. Manufactured with a 3.5" diameter and 0.114" wall thickness, Ford Racing's driveshaft is then fitted with heavy-duty 1330 U-joints and the correct 28 spline slip yoke to allow for more power handling and increased acceleration.

Vehicle Fitment:
- 1979-1995 5.0L V8 Mustangs
- 1979-2004 V6 Mustangs
*This will NOT fit 1999-2004 Cobra Mustangs.

Please Note: On Automatic V6 models, you will have to switch over the yoke from your original driveshaft and potentially rebalance the new driveshaft. Professional installation is STRONGLY recommended.