Black Housing Universal Rear Parking Brake Cables for 1964-1993 Mustangs.Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is Teflon-lined for smooth operation and stainless inner cable resists moisture. Design allows rear end backing plates to be removed without removing brake cables. Lokar Cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8' outer housings that 'U-Cut-To-Fit' and feature a black housing.
These cables are perfect for cars with a rear disc brake conversion kit. They are fully adjustable allowing you to create the perfect fit.
Application fits 8", 8.8" and 9" Fords with drum or disc brakes.
Product ReviewsWrite a review
What is the length of these cables?
If you are looking at a Lokar part Number EC-80FU the outer housing is 8" and the inner wire is 9" long, these are cut to fit and will allow you to fit them to your car.
Date published: 2017-03-27
I have a 66 mustang with 8.8 rear end from explorer. Would this parking brake cable work?
The cables you have highlighted (EC-80FU) are for most drum brakes which will not fit the explorer brakes with internal parking brakes. If you have the explorer rear end that has an internal drum in the rotor the correct cables for those brakes are (EC-81FU) for the black housing or (EC-81FHT) for the stainless braid. We do not make brake cables vehicle specific due to many variances between vehicles but do make them specific for the brakes. However the attachment on the handbrake side can be adapted to fit most applications or we may have a connector cable available to attach to the factory hand or foot brake.
Date published: 2017-03-16
I have a 1970 mustang that was modified before i bought it. It does have 4 wheel disc brakes but im unsure what kind or what they are off of. the parking brake was removed leaving me only with the interior foot pedal. Would this kit work for me?
Lokar offers many different cable kits and it would be best if you called our tech department as there is simply not enough information to steer you in the correct direction. Please call 1-877-469-7440 and we can get you the correct part number to buy from CJ Pony parts. Thank you,
Date published: 2017-01-23
I have a 65 with SSBC brakes that have the separate caliper for the emergency brake. I also have stock handbrake. Will this kit allow me to connect up to equalizer of original brake cable to the new emergency brake caliper?
This is a universal kit that sounds like it could be made to do exactly what you need it to.
Date published: 2016-03-08
hello, i was wondering if this would work on a 1970 mach 1. Do these cables reach from the pedal all the way to the rear axles? Thank You.
Yes, it will work on your 1970 Mach 1. They do run from the parking brake to the rear axle's brake area.
Date published: 2015-12-08
Hello,can this set work with the original parking brake system from a 1965 Ford mustang ?
It will fit.
Date published: 2015-12-08
You Might Also Like
CJ's Low Price:$242.99
CJ's Low Price:$695.00