Pair of Wheel Cylinder Brake Shoe Link Pins for 1965-1993 Mustangs with Drum Brakes.These are the metal pins that go into each side of the wheel cylinder. They are responsible for moving the brake shoe in and out when pressure is applied and also for keeping the brake shoe in place.
*2 pins required per wheel cylinder, 2 pair required per car.
Similar Mustang PartsMore Brake Hardware
Product ReviewsWrite a review
Wheel Cylinder Brake Shoe Link Pin Pair 1965-1993 is rated out of 5 by 4.
Rated 4 out of 5 by 66emberglo from Appears to be a quality part So much prettier than the pitted/corroded ones I'm replacing... What I received was NAPA Brakes brand (#UP80743), not just a generic "part in a bag". Ordered two sets for both rear wheel cylinders. Love the free (and fast) shipping!!
Date published: 2015-01-09
Rated 5 out of 5 by Diggler from Nice 'N New! I was redoing the entire braking system from back to front and although I really didn't need these pieces, I bought them anyway so I could have all brand new stuff. They work great and fit properly. Can't ask for much more.
Date published: 2015-02-10
Rated 5 out of 5 by Luna 64 from Whey work great Bought these to replace the original corroded pins in my 1964 1/2 factory drum brakes. They fit right in place with no trouble.
Date published: 2015-06-29
Rated 1 out of 5 by Richo from One pin received was not machined to final size Was unable to fit one fin due to machining. Part was only partially machined to size.
Date published: 2015-07-27
will these fit 1976 Mustang II 9" drums ?
Yes, they should.
Date published: 2015-05-15
The description is a little bit confusing. Are there 4 pins in this set? Meaning if you buy one of this part number, does it do two drums? And if you want to do the whole car, you will need to purchase 2 of this product number. Or is it just 2 pins?
It's two pins in this set.
Date published: 2015-01-26
what is the distance from the bottom of the slot to the round end
You Might Also Like