BMR Rear Upper Control Arm Adjustable On-Car With Polyurethane Bushings Pair 1979-2004
Pair of BMR On-Car Adjustable Rear Upper Control Arms with Polyurethane Bushings for 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.
Are you looking to improve the handling performance of your 1979-2004 Mustang? Then you need to take a look at this Pair of BMR On-Car Adjustable Rear Upper Control Arms with Polyurethane Bushings from CJ Pony Parts! The factory control arms use a soft rubber bushing that deflects when under load. The polyurethane bushings in the BMR control arms greatly reduce this deflection and help to put the power to the ground.
BMR Adjustable Rear Upper Control Arm Features and Benefits:
- Designed for on-car adjustability
- CNC-machined chrome-moly center adjuster
- 95-durometer polyurethane bushings
- MIG-welded 1-1/4” DOM steel tubing
- Reduces control arm flex and bushing deflection
- Designed for use for street performance, drag race and road race applications
- Powder-coated finish
- Installs within 2-3 hours
- Made in the USA
BMR manufactures their On-Car Adjustable Rear Upper Control Arms from heavy-duty 1-1/4” DOM steel tubing with a CNC-machined chrome-moly steel center adjuster which allows for on-car adjustability. This gives the control arm a strong design that will greatly improve handling performance by reducing wheel hop, providing better cornering consistency, and allowing you to launch harder. 95-durometer bushings provide a solid and more responsive feel than the stock rubber bushings. The bushings are greaseable and have an internal fluting system that evenly coats the bushings and keeps grease in the bushing under high loads.
BMR set out to design a control arm that would work for street performance, drag racing and road racing. They created a stronger control arm that reduces both control arm flex and bushing deflection that plague stock control arms. This gives you more confidence while cornering by greatly improving the handling performance of your Mustang. And the on-car adjustability of the control arm allows you to easily adjust pinion angles to reduce NVH. These BMR control arms are made right here in the USA and come with a durable powder-coated finish in your choice of black hammertone or red.
Please Note: These control arms are NOT designed for use with models equipped with the factory independent rear suspension.
With any Mustang, there are a lot of options to think about when upgrading or repairing suspension components. Once you find someone who offers quality components, along with your desired performance and ride quality, ordering is easy, as there's really only one suspension manufacturer that meets these criteria. BMR Suspension has performance and street components, each with the highest quality and wide selection of model years.
Order this Pair of BMR On-Car Adjustable Rear Upper Control Arms with Polyurethane Bushings for your 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang from CJ Pony Parts today!
Novice skill is required for this installation.
These adjustable control arms from BMR will be a direct replacement for the factory control arms found on your 1979 through 2004 Mustang. These are adjustable which will allow you to dial in your pinion angle and you can do so right on the car. They feature a chromoly center section with 1-1/2" DOM tubing and they're available in the black powder coat finish shown here or also in a red finish.
These are made right here in the U.S.A. and also feature a high quality polyurethane bushings.