Edelbrock Carburetor AVS2 Series 500 CFM Satin With Electric Choke

Edelbrock:
1901
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 119.47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Made In The USA
  • Improved Fuel Atomization
  • Ready To Run Out Of The Box
  • 500 CFM/Electric Choke
$403.95

Edelbrock Satin 500 CFM AVS2 Series Carburetor with an Electric Choke.

If you're looking to boost your Ford vehicle's engine without breaking the bank or taking your vehicle off the streets for months on end, than this high-quality Edelbrock Satin 500 CFM AVS2 Series Carburetor with an Electric Choke (1901) is calling your name! Don't wait and purchase yours now from CJ Pony Parts!

Edelbrock AVS2 Series Carburetor Features:
- Direct-fit upgraded carburetor cast and machined in the U.S.A.
- Prepped and ready to run right out of the box
- Annular flow boosters located in the Primary Venturis
- Improved atomization helps eliminate flat spots
- Features eight (8) equally-spaced orifices
- Cone-shaped spray of fuel flows into the Primary Venturi
- Offers a smooth throttle response from idle to full throttle
- Comes with factory set specs—will rarely need adjustments
- Able to be serviced without draining fuel or removing it from the engine bay
- Edelbrock’s patented two-piece design means there are no gaskets below the fuel level

Edelbrock designed this complete drop-in carburetor to the highest possible standards and has configured it with all of the factory-correct settings, so you can put it into your engine bay and get on your way! Their AVS2 Series features primary boosters with a new calibration to help improve off-idle and cruising, which will eliminate flat spats when traditional carburetors transition from idle to full throttle. Your new carb features eight equally-spaces holes for better fuel metering, which makes it the ideal option for small and big block Ford engines with either dual or single plane intake manifolds. Be sure to grab your new carburetor now from CJ's!

AVS2 Carburetor Specs:
- Finish: Satin Finish
- Barrel: 4-Barrel
- CFM: 500
- Choke: Electric
- Metering Jets: Primary .95, Secondary .095
- Metering Rods: .070 x .052
- Step-Up Spring: Orange (5" Hg)

*This AVS2 carburetor is also available with manual choke (CARBEDL34).

If you're looking for more performance from your Ford Engine, check out Edelbrock, who is one of the industry leaders with parts for most Ford Engines and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your Small Block Ford with high quality performance products. Place your order now with CJ's!

Go ahead and order this brand-new Edelbrock 1901 Satin 500 CFM AVS2 Series Carburetor with an Electric Choke from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,
  • 1980,
  • 1981,
  • 1982,
  • 1983,
  • 1984,
  • 1985,
  • 1986,
  • 1987,

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 78.32ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Stock 302, dual exhaust, 72 F100 want electric choke not a Hot rod but a nice parade truck the 600 Holly 4350 is to much carb. ??

Asked by: Keith
A 500 cfm would probably work better for your application.
Answered by: rk cjpp
Date published: 2019-08-13

I have a 1970 Mustang, 302. Currently a Holley 600cfm on it, looking to downsize. Besides fuel line, does this use the same throttle linkage parts? 

Asked by: Kyle70coupe
Yes, it would take the same linkage.
Answered by: rk cjpp
Date published: 2018-12-14

I am looking for a replacement carburetor for my '69 ford mustang, 302 base engine. Would you please give me some options, looking for simple bolt on? Thanks

Asked by: Markymark15
This carb will work but some modifications to the vacuum and fuel lines will be needed.
Answered by: rk cjpp
Date published: 2018-08-14
  • y_2019, m_11, d_7, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_CARBEDL32, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 19.02ms
  • QUESTIONS, PRODUCT