Edelbrock Carburetor AVS2 Series 500 CFM Satin With Manual Choke

Edelbrock:
1902
$382.95

Edelbrock Satin 500 CFM AVS2 Series Carburetor with a Manual Choke.

If it's finally time to start working on some underhood modifications to up your Ford vehicle's overall performance, than this Edelbrock Satin 500 CFM AVS2 Series Carburetor with a Manual Choke (1902) might be right up your alley! Go ahead and order yours from CJ Pony Parts today!

Edelbrock AVS2 Series 500 CFM Carburetor Features:
- Direct-fit upgraded carburetor cast and machined in the U.S.A.
- Prepped and ready to run right out of the box
- Annular flow boosters located in the Primary Venturis
- Improved atomization helps eliminate flat spots
- Features eight (8) equally-spaced orifices
- Cone-shaped spray of fuel flows into the Primary Venturi
- Offers a smooth throttle response from idle to full throttle
- Comes with factory set specs—will rarely need adjustments
- Able to be serviced without draining fuel or removing it from the engine bay
- Edelbrock’s patented two-piece design means there are no gaskets below the fuel level

Over the years, the power in your vehicle's engine can start to waver, leaving you wondering what you can do under the hood to get some of that performance back once more. Well, Edelbrock has solved that problem with this drop-in AVS2 Series Carburetor! Designed and machined right here in the U.S.A., you'll be able to use this manual choke carburetor straight from the box since it already has all of the factory specs. It will hardly ever need any kind of adjustments or re-calibrations over time and will offer better, smoother throttle response from idle to full throttle. You'll love the two-piece design since it makes install easier and doesn't have any gaskets under the fuel line, so you don't have to worry about leaks down the line. You'll love the increased performance this manual choke carb provides your vehicle, so what are you waiting for? Snag yours from CJ's today!

AVS2 Series Carburetor Specs:
- Finish: Satin Finish
- Barrel: 4-Barrel
- CFM: 500
- Choke: Manual
- Metering Jets: Primary .95, Secondary .095
- Metering Rods: .070 x .052
- Step-Up Spring: Orange (5" Hg)

*This AVS2 carburetor is also available with an electric choke (CARBEDL32).

If you're looking for more performance from your Ford Engine, check out Edelbrock, who is one of the industry leaders with parts for most Ford Engines and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your Small Block Ford with high quality performance products. Place your order now with CJ's!

Be sure to purchase this high-quality Edelbrock 1902 Satin 500 CFM AVS2 Series Carburetor with a Manual Choke now from CJ Pony Parts!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.