Edelbrock EFI Port Injection Kit Pro-Flo 4 550HP Satin 289/302
- Eight 29Lb/Hr Injectors
- Increased Throttle Response
- Necessary Wiring And O2 Sensor
- Supports Up To 550HP
Edelbrock Pro-Flo 4 550HP Satin EFI Port Injection Kit for 289 and 302 Engines.
If you’ve been contemplating upgrading your classic vehicle’s 289 or 302 engine to an EFI fuel system, you’re going to need this Edelbrock Pro-Flo 4 550HP Satin EFI Port Injection Kit (35930). Go ahead and purchase yours now from CJ Pony Parts!
EFI Port Injection Kit Features:
- Improved Bluetooth wireless technology
- Updated waterproof ECU housing
- Eight (8) 29lb./HR injectors
- Includes Edelbrock designed intake manifold
- Includes Edelbrock designed distributor
- All necessary wiring and O2 sensor
- Includes manifold gaskets
- 7” Android based tablet with E-Tuner app pre-installed
Edelbrock’s exclusive E-Tuner application uses base calibrations that have been developed on their dyno. The E-Tuner app uses a Bluetooth wireless connection to communicate with the ECU's self-learning capability to constantly adjust the calibration so you get the maximize performance of your 289 or 302 engine. This E-Tuner features a simple and easy-to-use setup wizard to help you get started. Best of all, the E-Tuner app is free and can be downloaded from the Google Play Store, allowing you to use a personal Android based smart phone or tablet. This kit does not require laptop tuning.
Another amazing feature of the Pro-Flo 4 is its ability to control both fuel and spark from the E-Tuner app. This E-Tuner app gives you full control of the system with the capability to adjust air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter and much more. Several dash displays are included so you can monitor engine vitals and performance from your Android smart phone or tablet.
This system features a high performance Edelbrock intake manifold with fuel rails and individual injector for each cylinder. The fuel injection is timed with the intake valve opening and delivered into the air flow stream at the end of the runner on the intake manifold right before it enters the combustion chamber. This produces the best fuel atomization and distribution for the ultimate performance. It gives you the most control and the most efficient way to deliver fuel into your engine.
Tech Tip: This Pro-Flo 4 EFI system can also be used with an Edelbrock engine compartment mounted Sump Fuel Kit (EDL36031) which provides a returnless fuel system.
Please Note: This Pro-Flo 4 EFI system will require the use of an electric high-pressure fuel pump. For 1965-1968 Mustang applications we recommend using (FTKEFI1) and for 1969-1970 Mustang applications we recommended using (FTKEFI2).
Order an Edelbrock (35930) Pro-Flo 4 550HP Satin EFI Port Injection Kit for your 289 or 302 Engine from CJ Pony Parts today!
California Residents: Proposition 65 Warning
This product will fit the following Bronco years:
This product will fit the following F-100 years:
This product will fit the following Mustang years:
- ARP Intake Manifold Bolts Black Chromoly Small Block 1965-1995$32.67 Regular Price $33.68