Edelbrock EFI Port Injection Kit Pro-Flo 4 625HP Satin 390/428



  • Eight 35Lb/Hr Injectors
  • Increases Throttle Response
  • Increased Fuel Economy
  • Supports Up To 625HP

Edelbrock Pro-Flo 4 625HP Satin EFI Port Injection Kit for 390 and 428 Engines.

Have you been thinking about upgrading your vehicle to an EFI fuel system? Be sure you have everything you need and pick up this Edelbrock Pro-Flo 4 625HP Satin EFI Port Injection Kit (35960) today from CJ Pony Parts!

Edelbrock Pro-Flo 4 EFI Port Injection Kit Features:
- Adds a powerful fuel injection system to your classic vehicle
- Fully sequential port EFI system delivers fuel into the intake air flow right at the port with an injector for each cylinder
- Allows for better fuel atomization and distribution
- Provides dramatically increased throttle response throughout the RPM range along with smooth engine operation
- Increases fuel economy by making your 390 or 428 engine more efficient
- Includes exclusive E-Tuner 4 application with base calibrations that uses Bluetooth to adjust calibrations over time to self-learn your specific system and maximize overall engine performance
- Also features a throttle body with the fuel rails and injectors mounted directly onto it
- Features a high-performance Edelbrock intake manifold with fuel rails and individual fuel injectors for each cylinder
- Includes premium-quality 7” Android-based tablet with E-Tuner app pre-installed
- Capable to support up to 625HP in 390/428 engines with eight (8) 35lb/HR injectors
- Includes all necessary wiring, O2 sensors and intake manifold gaskets

You'll love being able to control practically every aspect of your new EFI fuel system thanks to Edelbrock's Pro-Flo 4 system with E-Tuner app! You can control air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, rev limiter and more. Edelbrock includes a 7" Android tablet so you can download their free E-Tuner app from the Google Play Store and monitor and control your new system via bluetooth.

This new EFI system includes a high-performance Edelbrock intake manifold that has fuel rails and individual injectors for each cylinder. Your upgraded system will produce the best-possible fuel atomization and distribution for the ultimate performance of your 390 or 428 big block engine. You'll have increased fuel economy and an overall better vehicle, so don't hesitate and order your complete kit from CJ's today!

Please Note: This Pro-Flo 4 EFI system will require the use of an electric high-pressure fuel pump. For 1965-1968 Mustang applications we recommend using (FTKEFI1) and for 1969-1970 Mustang applications we recommend using (FTKEFI2).

Tech Tip: This Pro-Flo 4 EFI system can also be used with an Edelbrock engine compartment mounted Sump Fuel Kit, (EDL36031) which provides a returnless fuel system.

If you're looking for more performance from your Ford Engine, check out Edelbrock, who is one of the industry leaders with parts for most Ford Engines and more than 75 years of experience. Carburetors, exhausts, intake manifolds, and superchargers are just a few of the things that Edelbrock provides, giving you many ways that you can get the most out of your Small Block Ford with high quality performance products. Place your order today with CJ's!

Don't wait and order this high-quality Edelbrock 35960 Pro-Flo 4 625HP Satin EFI Port Injection Kit for your 390 or 428 Engine from CJ Pony Parts now!

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.