FiTech ECU And Harness Standalone Kit Ultimate LS W/ Trans Control

FiTech:
70051

Highlights

  • Premium Materials
  • Self Learning ECU
  • For a Variety of LS Engines
  • Sold as a Kit
$1,202.00
Earn
points.
Product Description

FiTech Ultimate LS ECU And Harness Standalone Kit with Trans Control.

Swapping an LS engine into any vehicle is easier with this Standalone ECU from FiTech. These kits (70051) are self learning, making them adaptable to a wide variety of LS engines. They are 24x and 58x Crank Reluctor compatible, and feature trans control featuress for a wide variety of GM automatic transmissions.

Features and Benefits:
- Self-learning ECU with touch screen controller for easy setup and configuration
- Sequential fuel and spark control with individual cylinder trim
- 3 BAR MAP sensor automatically detects up to 30 psi boost
- Stainless O2 Sensor bung (clamp or weld on)
- 24X and 58X crank and cam compatible
- Two programmable fan control outputs
- Tach output driver for most tachometers (5V)
- Output driver for most speedometers
- Compatible with car and truck coils
- Knock sensor control
- Fuel pump relay output
- Custom wire harness (uses factory coil pack sub harness)
- On the fly programmable target AFR and timing (if desired)

If you’re considering utilizing a factory intake, injectors, and cable operated throttle body, with a 4L60, 4L65, 4L70, or 4L80 GM transmission, FiTech’s Ultimate LS standalone self-learning ECU with transmission control will get your engine ready for optimal performance.

This self-learning Ultimate LS ECU is the best solution for a standalone LS swap and replaces the OEM computer and harness. This kit is dedicated to LS or similar engines with crank and cam sensors. The Ultimate LS standalone kit will self-learn to most cam swaps.

Usually, only very large cam grinds will require additional tuning in the system. Easily tuned for even the most novice tuner, this kit includes a touch-screen controller for easy setup and configuration.

The electronic transmission control is used when operating a GM electronically controlled automatic transmission. The Ultimate LS ECU has the ability to control the shift point, shift firmness, when to downshift properly, and all other features involved when controlling the transmission.

This feature is suitable for 4L60, 4L65, 4L80 or 4L85 GM transmissions. If using transmission control connect the two sides of the trans connector to the sub-harness and connect this to the connector on the transmission. Once connected to the transmission you are ready. If not using transmission control leave the connectors untouched.

Vehicle Fitment: LS or similar engines with crank and cam sensors. Transmission control feature is suitable for 4L60, 4L65, 4L80 or 4L85 GM transmissions.
Small Block V8 GEN. III/IV LS-based Chevrolet street and performance engines. Contains a 3 BAR MAP sensor for power adder applications that supports up to 30 PSI of boost.

Please Note: This kit does not work with drive by wire throttle bodies and variable valve timing. These engines can be modified to remove these components.
Not legal for use on pollution controlled vehicles: FiTech’s Ultimate LS System is not approved for use on emission controlled vehicles. This system is designed to control the EFI and ignition on LS based engines being retrofit into older vehicles that do not require emission controls.

This Kit Includes:
- LS ECU
- Plug and play primary wiring harness
- Hand-held controller with color touch screen and cable
- Windshield mount for touch screen controller
- 3 BAR MAP Sensor
- O2 Sensor
- Stainless Oxygen Sensor bung kit (Clamp or weld on)
- Two programmable fan control outputs

Vehicle Fitment: 1960-1987 C10

California Residents: Proposition 65 Warning

Related Categories: Chevrolet C10 Parts, C10 Restomod, C10 Engine, C10 LS Engine Swap Parts, C10 Restomod Engine

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles
Installation & Fitment

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account