FiTech Go EFI 8 System Self-Tuning 1200 HP Bright Aluminum W/ Handheld Controller

FiTech:
30013

Highlights

  • For High Horsepower Engines
  • 8 High-Flow Injectors
  • Replaces 4-Barrel Carburetor
  • Data-Logging & Tuning Software
$1,597.00
Earn
points.

FiTech Bright Aluminum Go EFI 8 1200 HP Self-Tuning Throttle Body EFI System with a Handheld Controller.

Control your vehicle’s engine at the touch of a button with this FiTech Go EFI 8 Self-Tuning Throttle Body EFI System with a Handheld Controller. This kit is perfect if you have a blow-through turbo, single roots-style supercharger, or a blower and you want to get rid of your 4-barrel carburetor. To elevate performance, this system is equipped with eight high-flow injectors that can handle up to 1200 HP and an annular discharge increased to 20 streams to handle the monstrous flow. The included data-logging and pro-tuning software allows you to control your vehicle straight from your laptop. This system can support 25 lbs of boost as soon as you install it!

Features and Benefits:
- Perfect for vehicles W/ high horsepower engines
- Eight high-flow injectors can handle up to 1200 HP
- Replaces standard 4-barrel carburetor
- Annular discharge design increased to 20 jet streams
- Data-logging and pro-tuning laptop software included
- Supports 25 lbs of boost out of the box
- Blower and turbo ready
- Allows you to control ignition timing
- Provides support for nitrous
- Fan controls & 2.5 BAR internal MAP sensor
- Built-in pressure regulator
- System has a bright aluminum finish

This system allows you to adjust your A/F and ignition timing to your liking; additionally, you can run a single stage of wet nitrous. Included in this kit are fan controls and a 2.5 BAR internal MAP sensor that sends accurate information to the ECU. Best of all, this system has a stunning and bright aluminum finish!

Kit Includes:
- (1) Die-cast throttle body
- (1) O2 bung kit
- (1) Hand-held controller
- (1) CTS sensor
- (1) Hand-held controller cable
- (1) CTS adapter
- (1) Windshield mount
- (1) Mini USB cable
- (1) 4+2-Pin Connector
- (1) Return plug
- (1) O2 sensor
- (1) Gasket kit

Vehicle Fitment:
- 1965-1985 Ford Mustang
- 1948-1979 Ford F-100
- 1966-1977 Ford Bronco
- 1960-1987 Chevrolet C10
- For engines that produce 250-1200 HP

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Engine, Ford Bronco Parts, Ford F-100 Parts, Bronco Engine

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account