FiTech Go EFI 3X2 Self-Tuning Kit Tri Power 600HP With Classic Gold Finish
Highlights
- Supports Up To 600HP
- Three 2-Barrel Design
- Classic Gold Finish
- No Tuning Required
FiTech 600HP Go EFI 3x2 Tri Power Self-Tuning Kit with Classic Gold Finish for 3x2-Barrel Intake Manifolds.
If you're looking to enhance your vehicle's fuel system, than this upgraded FiTech 600HP Go EFI 3x2 Tri Power Self-Tuning Kit (39610) with Classic Gold Finish might be right up your alley! Pick up yours today from CJ Pony Parts!
Go EFI Tri Power Self-Tuning Kit Features:
- Stunning gold finish
- Designed to work with any 3x2 intake manifold
- Self-learning system offers a wide range of fast dial-in corrections
- Externally-mounted ECU can be installed in various locations
- Arrives pre-programmed with Bolt-N-Go technology for out-of-the-box performance without any tuning
- Capable of supporting 250HP to 600HP engines
- Includes premium high-flow aluminum throttle body
- Also includes OE-quality wideband 02 sensor and TPS sensor
- Patented Swirl Spray Annular discharge design that ensures complete automization
FiTech understands that updating and modernizing your classic car's fuel system can be pretty daunting, but that's exactly why they developed this all-new Tri Power Self-Tuning Kit! This upgrade kit includes an external ECU that's able to be mounted in a variety of different places, allowing you the flexibility that your custom system might need. You'll be able to toss that old carburetor and quickly jump into the EFI world with this bolt-on system. It's self-learning and self-tuning with takes away lots of the hassle and questions you might have during or after installation, meaning you'll be back on the road in no time flat. Support your other performance enhancements and grab this Tri Power Self-Tuning Kit now from CJ's!
Please Note: This FiTech Go EFI 3x2 Kit will require the use of an electric high-pressure fuel pump. For 1965-1968 Mustang applications we recommend using (FTKEFI7) and for 1969-1970 Mustang applications we recommend using (FTKEFI8).
Tech Tip: This EFI system can also be used with an engine compartment mounted Fuel Command Center, (FP67) which provides a returnless system.
FiTech Fuel Injection is dedicated to engineering, developing, and producing the most advanced and affordable electronic fuel injection systems on the planet. Their brand-new fuel injection systems are able to support a variety of engine options including engines with up to 1,200HP, dual quad engines, nitrous or boosted engines and even E85 engines. Don’t hesitate and upgrade your vehicle’s fuel system with the help of CJ’s and FiTech today!
Go ahead and purchase this brand-new FiTech 600HP Go EFI 3x2 Tri Power Self-Tuning Kit with Classic Gold Finish from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Installation Difficulty
Intermediate skill is required for this installation.
Installation Instructions
Vehicle Fitment
This product will fit the following Bronco years:
This product will fit the following C10 years:
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
- 1980,
- 1981,
- 1982,
- 1983,
- 1984,
- 1985,
- 1986,
- 1987,
This product will fit the following F-100 years:
- 1948,
- 1949,
- 1950,
- 1951,
- 1952,
- 1953,
- 1954,
- 1955,
- 1956,
- 1957,
- 1958,
- 1959,
- 1960,
- 1961,
- 1962,
- 1963,
- 1964,
- 1965,
- 1966,
- 1967,
- 1968,
- 1969,
- 1970,
- 1971,
- 1972,
- 1973,
- 1974,
- 1975,
- 1976,
- 1977,
- 1978,
- 1979,
This product will fit the following Mustang years:
