FiTech LS Self-Tuning Intake Kit LS7 Ultimate Without Transmission Control 500HP

If you have a need for speed, you'll want the FiTech LS7 Ultimate LS Self-Tuning Intake Kit 70015 without the Transmission Control 500HP! The self-tuning induction system is built specifically for the DIY-er on the aftermarket. The square port LS7 heads are compatible with the 6-1/2-inch tall intake manifold to produce a high-flow 92mm throttle body that sits at seven degrees. The Ultimate LS7 500HP Intake Manifold Kit with 92mm throttle body is a complete self-tuning induction system. FiTech’s Ultimate EFI is suitable for that junkyard 5.3 to a stroker 427, making it even easier to ditch the old factory hardware or top off that fresh long block. 

Features:
- Square Port LS7 heads compatible with intake manifold
- 6-1/2" tall intake manifold
- 92mm, 7-degree high flow cable operated throttle body

*Throttle body will clear any stock truck accessories depending on the type of water pump, and if there is truck water pump accessory clearance interference, you will need to get a new water pump bracket.
*Fits Small Block V8 GEN. III/IV LS-based Chevrolet street and performance engines with a 1500-6500 rpm power-band up to 500 HP to the flywheel.

Engine Fitment:
- 5.3 L / 325 c.i. L33, L59, LM4, LM7

Please Note: Coil packs and a supported fuel system (i.e., part number FI50004 or other comparable fuel systems) are REQUIRED, not included, for the installation of this self-tuning kit.