FiTech Go EFI 8 Self-Tuning Kit 1200HP With Cast Finish
- 1200HP Capable Kit
- Fully Self-Tuning
- Quick And Easy Setup
- Cast Finish
FiTech 1200HP Go EFI 8 Self-Tuning Kit with a Cast Finish for 4-Barrel Intake Manifolds.
One of FiTech’s top of the line self-tuners, this FiTech 30012 1200HP Go EFI 8 Self-Tuning Kit with a Cast Finish has a horsepower range that runs from 250-1200 with a rating at 800HP. Standard features on this self-tuning kit include data-logging and pro-tuning software in addition to an annular design that is increased to 20 jet streams to accommodate the massive flow of fuel.
Features and Benefits:
- Black finish
- 8 precision flow matched injectors capable of flowing 1200 HP of fuel
- 4 gig data logging
- Boost ready throttle body
- Boost ready ECU 2.5 bar internal MAP sensor good for 21.7 PSI
- Nitrous control with a host of safety features and accessories for nitrous tuning
- Nitrous and boost specific target A/F options
- Ignition timing can be controlled and adjusted on the fly from your touch screen controller
- Will work with CDI box but not required to control timing
- Built in fuel pressure regulator
- No extra regulator to mount on your firewall
- After startup the ECU immediately takes over and provides your vehicle with an optimum tune
- Go-EFI Systems feature wet flow technology
- Unique swirl spray annular discharge design that assures complete fuel atomization
- 1965-1985 Mustang
- 1966-1977 Bronco
- 1948-1979 F-100
- 1960-1987 Chevrolet C10
Your new self-tuning kit fits any 4-bbl intake manifold while being the most self-contained and full-featured unit of its kind. The ECU (computer) is mounted on the throttle body to significantly ease the installation process. Additionally, this is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. To further upgrade the performance of your classic car or truck, this kit comes with a built-in fuel pressure regulator and a handheld controller with an extremely responsive touch screen for a quick and easy initial set-up.
Please Note: This FiTech Go EFI 8 Kit will require the use of an electric high-pressure fuel pump, this kit will not work with a mechanical fuel pump. For 1965-1968 Mustang applications we recommend using (P/N: FTKEFI7) and for 1969-1970 Mustang applications we recommend using (P/N: FTKEFI8).
FiTech Fuel Injection is dedicated to engineering, developing, and producing the most advanced and affordable electronic fuel injection systems on the planet. Their technology is designed and developed using OEM level engineering and components. The software has OEM level functionality, diagnostics, and limp home modes.
Order this FiTech 30012 1200HP Go EFI 8 Self-Tuning Kit with a Cast Finish today from CJ Pony Parts.
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Advanced skill is required for this installation.
This product will fit the following Bronco years:
This product will fit the following C10 years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: