Set of Four Chrome 'Ford' Valve Cover Wing Bolts.The Ford Oval is cut sharply into the top of each wing nut. The lower ends of the shafts are manufactured with wide shoulders for broad load distribution. All nuts are supplied with a separate stud which permits precision gasket positioning on the head prior to mounting the valve covers. Features 1/4-20 threads.
Overall length- 4-1/8"
Diameter of the bolt- 1/2"
Length from bottom of the "wing" to the bottom of the bolt- 3-1/2"
Length of the "wing" at the top of the bolt- 2-1/4"
Width of the "wing" at the top of the bolt- 1/2"
*Does NOT fit FE engines.
Ford Oval and name plates used under license to Specialty Auto Parts U.S.A., Inc.
Similar Mustang PartsMore Gaskets, Breathers & Hardware
Product ReviewsWrite a review
IS there a trick to getting the wing bolts to tighten so there are aligned? The seal fine but the wings are at different angles. Thanks
You could try and use a combination of washers under the wing bolt to get them to line up.
Date published: 2016-05-13
You Might Also Like
CJ's Low Price:$17.99